Sitemap | E-mail:sales@steelgs.com

1.0460 chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of 1.0460

Location » Home » Grades > Stainless Steels > 1.0460

Contact

+86-13880247006

E-mail: sales@longhaisteel.com

EN 1.0460

Profile

This page is mainly introduced the 1.0460 chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of 1.0460,such as it is commonly used in bars, sheet,plates, steel coils, steel pipes,forged and other materials application.
1.0460

Steel Garde:1.0460
Type:Stainless Steels
Country:European
Standard:EN
Standard Number:

ITEM Standard Number Descriptions

1 EN 10273: 2007 Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
Metallographic Structure:Martensite
Application:Non-alloy quality steel

ITEM	Standard Number	Descriptions
1	EN 10273: 2007	Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties

Cross Reference Table(Equivalent Materials):

Material	Standard	Country
P250GH	EN	European

Chemical composition(mass fraction)(wt.%)

Elements	Min.（≥）	Max.（≤）
C	0.18	0.23
Si		0.4
Mn	0.3	0.9
Ni		0.3
P		0.025
S		0.015
Cr		0.3
Ti		0.03
N	0.03	0.07
Nb		0.010
Al	0.0015	0.05
V		0.02
other		Cr+Cu+Mo+Ni < 0.7

Mechanical Properties

Tensile strength	042～369	σb/MPa
Yield Strength	879	σ 0.2 ≥/MPa
Elongation	79	δ5≥(％)
ψ	-	ψ≥(％)
Akv	-	Akv≥/J
HBS	620～738	-
HRC	30	-

Physical Properties

Thermal expansion	28-71	e-6/K
Thermal conductivity	12-53	W/m.K
Specific heat	450-460	J/kg.K
Melting temperature	8001-2207	째C
Density	6366-3550	kg/m³
Resistivity	0.50-0.60	Ohm.mm²/m

Heat Treatment Regime

Annealing	Quenching	Tempering	Normalizing	Q & T
√	√	√	√	√

Size Availability

Steel Grade	Specification	Processing range(mm)
1.0460 Stainless Steels	Round Bar and Hollow Bar	Φ1 to Φ2000
	Square and Flat Steel	Φ10 to Φ100
	Plate and Sheet	0.08-800(Thickness)10-1500(Width)Length
	Tube or Pipe	OD:Φ4-410; WT:1-35 mm; Lenght:10-12000
	Coil and Strip Steel	THK:0.1mm Width:1500mm
	Forged	Ring/Cylindrical/Disk