Sitemap | E-mail:sales@steelgs.com

AISIS15500 chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of AISIS15500

Location » Home » Grades > Stainless Steels > AISIS15500

Contact

+86-13880247006

E-mail: sales@longhaisteel.com

AISI AISIS15500

Profile

This page is mainly introduced the AISIS15500 chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of AISIS15500,such as it is commonly used in bars, sheet,plates, steel coils, steel pipes,forged and other materials application.
AISIS15500

Steel Garde:AISIS15500
Type:Stainless Steels
Country:USA
Standard:AISI
Application:AISIS15500

Cross Reference Table(Equivalent Materials):

Material	Standard	Country
A 564 S15500	SAE	USA
A 693 S15500	SAE	USA
A 705 S15500	SAE	USA
S15500	AISI	USA
SA-564 S15500	AMS	USA
SA-693 S15500	AMS	USA
SA-705 S15500	AMS	USA
A 564 S15500	SAE	USA
A 693 S15500	SAE	USA
A 705 S15500	SAE	USA
S15500	AISI	USA
SA-564 S15500	AMS	USA
SA-693 S15500	AMS	USA
SA-705 S15500	AMS	USA
A 564 XM-12	SAE	USA
A 693 Type XM-12	SAE	USA
A 705 XM-12	SAE	USA
A 959 Type XM-12	SAE	USA
SA-564 XM-12	AMS	USA
SA-693 Type XM-12	AMS	USA
SA-705 Type XM-12	AMS	USA
AISIS15500	AISI	USA
S15500	UNS	USA
15-5PH,1.4545,X5CrNiCuNb15-5,S15500	ASTM	USA

Chemical composition(mass fraction)(wt.%)

Elements	Min.（≥）	Max.（≤）
c		0.07
Si		1.00
Mn		1.00
P		0.04
S		0.03
Cr	14.0	15.5
Ni	3.50	5.50
Cu	2.50	4.50
Nb	0.15	0.45

Mechanical Properties

Tensile strength	913～806	σb/MPa
Yield Strength	064	σ 0.2 ≥/MPa
Elongation	05	δ5≥(％)
ψ	-	ψ≥(％)
Akv	-	Akv≥/J
HBS	402～851	-
HRC	30	-

Physical Properties

Thermal expansion	74-23	e-6/K
Thermal conductivity	63-92	W/m.K
Specific heat	450-460	J/kg.K
Melting temperature	7817-0286	째C
Density	9932-3902	kg/m³
Resistivity	0.50-0.60	Ohm.mm²/m

Heat Treatment Regime

Annealing	Quenching	Tempering	Normalizing	Q & T
√	√	√	√	√

Size Availability

Steel Grade	Specification	Processing range(mm)
AISIS15500 Stainless Steels	Round Bar and Hollow Bar	Φ1 to Φ2000
	Square and Flat Steel	Φ10 to Φ100
	Plate and Sheet	0.08-800(Thickness)10-1500(Width)Length
	Tube or Pipe	OD:Φ4-410; WT:1-35 mm; Lenght:10-12000
	Coil and Strip Steel	THK:0.1mm Width:1500mm
	Forged	Ring/Cylindrical/Disk