+86-13880247006
E-mail: sales@longhaisteel.com
AMS 6512 Bar and Forging Stock
Werkstoff Nr. 1.6359
MIL-S-46850
BS S162
DTD 5212
MSRR 6551
MAT 102
MIA 101
Udimar 250
Vascomax C250
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | 0.03 | |||
| Ni | 17.00 | 19.00 | ||
| Co | 7.00 | 8.50 | ||
| Mn | 0.10 | |||
| Si | 0.10 | |||
| Al | 0.05 | 0.15 | ||
| Mo | 4.60 | 5.20 | ||
| S | 0.010 | |||
| P | 0.010 | |||
| Ti | 0.30 | 0.50 | ||
| Fe | Bal | |||
| Cr | 0.50 | |||
| Cu | 0.50 |
| Tensile strength | 571～779 | σb/MPa |
| Yield Strength | 612 | σ 0.2 ≥/MPa |
| Elongation | 01 | δ5≥(％) |
| ψ | - | ψ≥(％) |
| Akv | - | Akv≥/J |
| HBS | 242～341 | - |
| HRC | 30 | - |
| Thermal expansion | 17-83 | e-6/K |
| Thermal conductivity | 28-32 | W/m.K |
| Specific heat | 450-460 | J/kg.K |
| Melting temperature | 4470-6805 | 째C |
| Density | 5635-2932 | kg/m3 |
| Resistivity | 0.50-0.60 | Ohm.mm2/m |
| Steel Grade | Specification | Processing range(mm) |
| 1.6359 Superalloys | Round Bar and Hollow Bar | Φ1 to Φ2000 |
| Square and Flat Steel | Φ10 to Φ100 | |
| Plate and Sheet | 0.08-800(Thickness)*10-1500(Width)*Length | |
| Tube or Pipe | OD:Φ4-410; WT:1-35 mm; Lenght:10-12000 | |
| Coil and Strip Steel | THK:0.1mm Width:1500mm | |
| Forged | Ring/Cylindrical/Disk |
