+86-13880247006
E-mail: sales@longhaisteel.com
| ITEM | Standard Number | Descriptions |
|---|---|---|
| 1 | BS 970-1 | Specification for wrought steels for mechanical and allied engineering purposes. General inspection and testing procedures and specific requirements for carbon, carbon manganese, alloy and stainless steels |
| 2 | BS 970-3 | Specification for wrought steels for mechanical and allied engineering purposes. Bright bars for general engineering purposes |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | 0.20 | 0.28 | ||
| Si | 1.00 | |||
| Mn | 1.50 | |||
| P | 0.06 | |||
| S | 0.15 | 0.35 | ||
| Cr | 12.00 | 14.00 | ||
| Mo | 0.60 | |||
| Ni | 1.00 |
| Tensile strength | 324～292 | σb/MPa |
| Yield Strength | 528 | σ 0.2 ≥/MPa |
| Elongation | 78 | δ5≥(％) |
| ψ | - | ψ≥(％) |
| Akv | - | Akv≥/J |
| HBS | 611～548 | - |
| HRC | 30 | - |
| Thermal expansion | 05-01 | e-6/K |
| Thermal conductivity | 22-88 | W/m.K |
| Specific heat | 450-460 | J/kg.K |
| Melting temperature | 2000-3521 | 째C |
| Density | 2919-2895 | kg/m3 |
| Resistivity | 0.50-0.60 | Ohm.mm2/m |
| Steel Grade | Specification | Processing range(mm) |
| 416S37 Stainless Steels | Round Bar and Hollow Bar | Φ1 to Φ2000 |
| Square and Flat Steel | Φ10 to Φ100 | |
| Plate and Sheet | 0.08-800(Thickness)*10-1500(Width)*Length | |
| Tube or Pipe | OD:Φ4-410; WT:1-35 mm; Lenght:10-12000 | |
| Coil and Strip Steel | THK:0.1mm Width:1500mm | |
| Forged | Ring/Cylindrical/Disk |