+86-13880247006
E-mail: [email protected]
| Material | Standard | Country |
| H11 | ASTM | USA |
| H12 | ASTM | USA |
| H14 | ASTM | USA |
| H19 | ASTM | USA |
| CPM H13 | AISI | USA |
| CPM H19 | AISI | USA |
| CPM H19V | AISI | USA |
| SKH10 | JIS | Japan |
| H1 | JIS | Japan |
| H1 | JIS | Japan |
| :BH10 | UK | |
| :BH10 | UK | |
| BH10A | UK | |
| BH10A | UK | |
| BH11 | UK | |
| BH11 | UK | |
| BH11 | UK | |
| BH11 | UK | |
| BH12 | UK | |
| BH12 | UK | |
| BH13 | UK | |
| BH13 | UK | |
| BH19 | UK | |
| BH19 | UK | |
| TH1 | AFNOR | France |
| TH1 | AFNOR | France |
| TH1 | AFNOR | France |
| TH1 | AFNOR | France |
| H30 | SS | Sweden |
| H30 | SS | Sweden |
| PH13-8Mo | UNS | USA |
| PH13-8Mo | UNS | USA |
| PH14-8Mo | UNS | USA |
| PH14-8Mo | UNS | USA |
| PH15-7MO(Type632) | UNS | USA |
| PH15-7MO(Type632) | UNS | USA |
| UNS H15410 | UNS | USA |
| UNS H15470 | UNS | USA |
| 08X20H14C2 | ||
| 20X20H14C2 | ||
| 20X23H13 | ||
| 15X18H12C4TЮ | ||
| 45X14H1482M | ||
| 09X14H16Б | ||
| 09X14H1982БP | ||
| 40X15H7Γ7Φ2 | ||
| 08X16H13M2Б | ||
| 03X16H15M3 | ||
| 03X16H15M3Б | ||
| 09X16H15M3Б | ГОСТ | Russia |
| Tensile strength | 241～899 | σb/MPa |
| Yield Strength | 447 | σ 0.2 ≥/MPa |
| Elongation | 81 | δ5≥(％) |
| ψ | - | ψ≥(％) |
| Akv | - | Akv≥/J |
| HBS | 498～367 | - |
| HRC | 30 | - |
| Thermal expansion | 72-76 | e-6/K |
| Thermal conductivity | 18-49 | W/m.K |
| Specific heat | 450-460 | J/kg.K |
| Melting temperature | 8336-6802 | 째C |
| Density | 1133-0164 | kg/m3 |
| Resistivity | 0.50-0.60 | Ohm.mm2/m |
| Steel Grade | Specification | Processing range(mm) |
| ISO H1 Special Alloy | Round Bar and Hollow Bar | Φ1 to Φ2000 |
| Square and Flat Steel | Φ10 to Φ100 | |
| Plate and Sheet | 0.08-800(Thickness)*10-1500(Width)*Length | |
| Tube or Pipe | OD:Φ4-410; WT:1-35 mm; Lenght:10-12000 | |
| Coil and Strip Steel | THK:0.1mm Width:1500mm | |
| Forged | Ring/Cylindrical/Disk |
