+86-13880247006
E-mail: [email protected]
21CMoV5-7 alloy structural steel and its 1.7709 replacement alloys belong to the group of high temperature boiler steels for energy industries. They are used in the production of components/subassemblies for the power industry, working at the temperatures up to 550 oC for small parts and for large forgings. The main applications of these grades of steel are rotors of steam turbines, rotor blades, shaft forgings, reservoirs and covers for up to 550 ℃ temperatures, nuts, tubes for high temperatures up to 540 ℃.
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | 0.17 | 0.25 | ||
| Mn | 0.30 | 0.50 | ||
| Si | 0.30 | 0.60 | ||
| P | 0.035 | |||
| S | 0.035 | |||
| Cr | 1.20 | 1.50 | ||
| Ni | 0.60 | |||
| Mo | 1.00 | 1.20 | ||
| V | 0.25 | 0.35 |
| Tensile strength | 778～858 | σb/MPa |
| Yield Strength | 132 | σ 0.2 ≥/MPa |
| Elongation | 45 | δ5≥(％) |
| ψ | - | ψ≥(％) |
| Akv | - | Akv≥/J |
| HBS | 053～069 | - |
| HRC | 30 | - |
| Thermal expansion | 87-70 | e-6/K |
| Thermal conductivity | 45-06 | W/m.K |
| Specific heat | 450-460 | J/kg.K |
| Melting temperature | 2073-1014 | 째C |
| Density | 6909-4306 | kg/m3 |
| Resistivity | 0.50-0.60 | Ohm.mm2/m |
| Steel Grade | Specification | Processing range(mm) |
| 21CrMoV5-7, 1.7709, 21CrMoV5-11, 1.8070 Structural Steel | Round Bar and Hollow Bar | Φ1 to Φ2000 |
| Square and Flat Steel | Φ10 to Φ100 | |
| Plate and Sheet | 0.08-800(Thickness)*10-1500(Width)*Length | |
| Tube or Pipe | OD:Φ4-410; WT:1-35 mm; Lenght:10-12000 | |
| Coil and Strip Steel | THK:0.1mm Width:1500mm | |
| Forged | Ring/Cylindrical/Disk |
