AMS 6305E 17-22A chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of AMS 6305E 17-22A

AMS AMS 6305E 17-22A

Profile

This page is mainly introduced the AMS 6305E 17-22A chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of AMS 6305E 17-22A,such as it is commonly used in bars, sheet,plates, steel coils, steel pipes,forged and other materials application.

Steel, Heat-Resistant, Bars, Forgings, and Tubing 0.95Cr - 0.55Mo - 0.30V (0.40 - 0.50C) Vacuum Arc Remelted.

Melting Practice

Steel shall be multiple melted using consumable electrode vacuum practice (VAR) in the remelt cycle.

Macrostructure

Visual examination of transverse full cross-sections from bars, billets, tube rounds (solid, not hollow), and forging stock,

etched in hot hydrochloric acid in accordance with ASTM A 604, shall show no pipe or cracks. Porosity, segregation, inclusions, and other imperfections shall be no worse than the macrographs of ASTM A 604 shown in Table 2.

10.png


Average Grain Size of Bars, Forgings and Tubing

Shall be ASTM No. 5 or finer, determined in accordance with ASTM E 112.





  • Steel Garde:AMS 6305E 17-22A
  • Type:Aviation and Aero Steel
  • Country:USA
  • Standard:AMS
  • Standard Number:
    ITEM Standard Number Descriptions
    1 AM S6305E-2012 Steel, Heat-Resistant, Bars, Forgings, and Tubing 0.95Cr - 0.55Mo - 0.30V (0.40 - 0.50C) Vacuum Arc Remelted
  • Application:Steel, Heat-Resistant, Bars, Forgings, and Tubing 0.95Cr - 0.55Mo - 0.30V (0.40 - 0.50C) Vacuum Arc Remelted

Cross Reference Table(Equivalent Materials):

Material Standard Country
AMS 6305F 17-22A AMS USA

Chemical composition(mass fraction)(wt.%)

Elements Min.(≥) Max.(≤) Similar Remarks
C 0.40  0.50
Si 0.15  0.35
Mn 0.40  0.70
P   0.015
S   0.015
Cr 0.80  1.10
Mo 0.45  0.65
V 0.25  0.35
Ni   0.25
Cu   0.35
Lead   0.001(10 PPM)

Mechanical Properties

Tensile strength 148~492 σb/MPa
Yield Strength 606 σ 0.2 ≥/MPa
Elongation 11 δ5≥(%)
ψ - ψ≥(%)
Akv - Akv≥/J
HBS 265~872 -
HRC 30 -

Physical Properties

Thermal expansion 41-58 e-6/K
Thermal conductivity 50-62 W/m.K
Specific heat 450-460 J/kg.K
Melting temperature 2913-8478 째C
Density 4542-6683 kg/m3
Resistivity 0.50-0.60 Ohm.mm2/m
     

Heat Treatment Regime

Annealing

Quenching

Tempering

Normalizing

Q & T

Size Availability

Steel Grade Specification Processing range(mm)
AMS 6305E 17-22A Aviation and Aero Steel Round Bar and Hollow Bar Φ1 to Φ2000
Square and Flat Steel Φ10 to Φ100
Plate and Sheet 0.08-800(Thickness)*10-1500(Width)*Length
Tube or Pipe OD:Φ4-410; WT:1-35 mm; Lenght:10-12000
Coil and Strip Steel THK:0.1mm Width:1500mm
Forged Ring/Cylindrical/Disk

Technical specification/standard for download