+86-13880247006
E-mail: sales@longhaisteel.com
| ITEM | Standard Number | Descriptions |
|---|---|---|
| 1 | A 213/A 213M (2011) | Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes |
| 2 | A 240/A 240M (2012) | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| 3 | A 249/A 249M (2010) | Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes |
| 4 | A 276 (2010) | Stainless Steel Bars and Shapes |
| 5 | A 314 (2008) | Stainless Steel Billets and Bars for Forging |
| 6 | A 473 (2009) | Stainless Steel Forgings |
| 7 | A 959 (2011) | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels |
| 8 | SAE AMS-QQ-S-763B (1998) | Steel, Corrosion Resistant, Bars, Wire, Shapes, and Forgings |
| 9 | SAE J 405 (1998) | Chemical compositions of SAE wrought stainless steels |
| Material | Standard | Country |
| 202 | YB | USA |
| S20200 | YB | USA |
| A 895 S42020 | SAE | USA |
| S42020 | AISI | USA |
| A 582 S42023 | SAE | USA |
| A 895 S42023 | SAE | USA |
| S42023 | AISI | USA |
| A 582 S42023 | SAE | USA |
| A 895 S42023 | SAE | USA |
| S42023 | AISI | USA |
| SUS 202 | JIS | Japan |
| SUS 202 | JIS | Japan |
| SUS 202 | JIS | Japan |
| 202S16 | B.S. | UK |
| 2HR202 | B.S. | UK |
| STS202 | KS | Korea |
| CNS 202 | CNS | China |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | 0.15 | |||
| Si | 1.00 | |||
| Mn | 7.50 | 10.0 | ||
| P | 0.06 | |||
| S | 0.03 | |||
| Cr | 17.0 | 19.0 | ||
| Ni | 4.00 | 6.00 | ||
| N | 0.25 |
| Tensile strength | 361～158 | σb/MPa |
| Yield Strength | 443 | σ 0.2 ≥/MPa |
| Elongation | 08 | δ5≥(％) |
| ψ | - | ψ≥(％) |
| Akv | - | Akv≥/J |
| HBS | 786～606 | - |
| HRC | 30 | - |
| Thermal expansion | 35-52 | e-6/K |
| Thermal conductivity | 15-64 | W/m.K |
| Specific heat | 450-460 | J/kg.K |
| Melting temperature | 1757-2890 | 째C |
| Density | 2480-9281 | kg/m3 |
| Resistivity | 0.50-0.60 | Ohm.mm2/m |
| Steel Grade | Specification | Processing range(mm) |
| ASTM 202 Stainless Steels | Round Bar and Hollow Bar | Φ1 to Φ2000 |
| Square and Flat Steel | Φ10 to Φ100 | |
| Plate and Sheet | 0.08-800(Thickness)*10-1500(Width)*Length | |
| Tube or Pipe | OD:Φ4-410; WT:1-35 mm; Lenght:10-12000 | |
| Coil and Strip Steel | THK:0.1mm Width:1500mm | |
| Forged | Ring/Cylindrical/Disk |