Sitemap | E-mail:[email protected]

SA-479 S32950 chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of SA-479 S32950

Location » Home » Grades > Stainless Steels > SA-479 S32950

Contact

+86-13880247006

E-mail: [email protected]

AMS SA-479 S32950

Profile

This page is mainly introduced the SA-479 S32950 chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of SA-479 S32950,such as it is commonly used in bars, sheet,plates, steel coils, steel pipes,forged and other materials application.

Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels

Steel Garde:SA-479 S32950
Type:Stainless Steels
Country:USA
Standard:AMS
Standard Number:

ITEM Standard Number Descriptions

1 SA-479/SA-479M Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
Metallographic Structure:Austenitic-Ferritic(Duplex steel)
Application:Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels

ITEM	Standard Number	Descriptions
1	SA-479/SA-479M	Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels

Cross Reference Table(Equivalent Materials):

Material	Standard	Country
A 1049 S32950	SAE	USA
A 1082 S32950	SAE	USA
A 240 S32950	SAE	USA
A 314 S32950	SAE	USA
A 473 S32950	SAE	USA
A 479 S32950	SAE	USA
A 511 S32950	SAE	USA
A 789 S32950	SAE	USA
A 790 S32950	SAE	USA
A 815 CRS32950	SAE	USA
A 815 WPS32950	SAE	USA
A 928 S32950	SAE	USA
A 949 S32950	SAE	USA
A 959 S32950	SAE	USA
A 988 S32950	SAE	USA
S32950	AISI	USA
SA-240 S32950	AMS	USA
SA-789 S32950	AMS	USA
SA-790 S32950	AMS	USA
SA-815 CRS32950	AMS	USA
SA-815 WPS32950	AMS	USA
A 1049 S32950	SAE	USA
A 1082 S32950	SAE	USA
A 240 S32950	SAE	USA
A 314 S32950	SAE	USA
A 473 S32950	SAE	USA
A 479 S32950	SAE	USA
A 511 S32950	SAE	USA
A 789 S32950	SAE	USA
A 790 S32950	SAE	USA
A 815 CRS32950	SAE	USA
A 815 WPS32950	SAE	USA
A 928 S32950	SAE	USA
A 949 S32950	SAE	USA
A 959 S32950	SAE	USA
A 988 S32950	SAE	USA
S32950	AISI	USA
SA-240 S32950	AMS	USA
SA-479 S32950	AMS	USA
SA-789 S32950	AMS	USA
SA-790 S32950	AMS	USA
SA-815 CRS32950	AMS	USA
SA-815 WPS32950	AMS	USA

Chemical composition(mass fraction)(wt.%)

Elements	Min.（≥）	Max.（≤）
C		0.03
Mn		2.00
Si		0.60
P		0.035
S		0.01
Cr	26.00	29.00
Ni	3.50	5.20
Mo	1.00	2.50
N	0.15	0.35

Mechanical Properties

Tensile strength	763～081	σb/MPa
Yield Strength	268	σ 0.2 ≥/MPa
Elongation	23	δ5≥(％)
ψ	-	ψ≥(％)
Akv	-	Akv≥/J
HBS	856～415	-
HRC	30	-

Physical Properties

Thermal expansion	54-88	e-6/K
Thermal conductivity	29-02	W/m.K
Specific heat	450-460	J/kg.K
Melting temperature	2700-4431	째C
Density	5049-0383	kg/m³
Resistivity	0.50-0.60	Ohm.mm²/m

Heat Treatment Regime

Annealing	Quenching	Tempering	Normalizing	Q & T
√	√	√	√	√

Size Availability

Steel Grade	Specification	Processing range(mm)
SA-479 S32950 Stainless Steels	Round Bar and Hollow Bar	Φ1 to Φ2000
	Square and Flat Steel	Φ10 to Φ100
	Plate and Sheet	0.08-800(Thickness)10-1500(Width)Length
	Tube or Pipe	OD:Φ4-410; WT:1-35 mm; Lenght:10-12000
	Coil and Strip Steel	THK:0.1mm Width:1500mm
	Forged	Ring/Cylindrical/Disk