AISI S41000

Contact

+86-13880247006

Catalog

S41000 Profile
S41000 Chemical composition
S41000 Mechanical Properties
S41000 Physical Properties
S41000 Heat treatment
S41000 Size Availability
S41000 Relevant products

Profile

This page is mainly introduced the S41000 chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of S41000,such as it is commonly used in bars, sheet,plates, steel coils, steel pipes,forged and other materials application.

Martensitic Chromium Stainless Steel (Hardenable by Heat Treatment)

Steel Garde:S41000
Type:Stainless Steels
Country:USA
Standard:AISI
Metallographic Structure:Martensite
Application:Martensitic Chromium Stainless Steel (Hardenable by Heat Treatment)

Relevant products:

410 Stainless Steel Flat bars

Cross Reference Table(Equivalent Materials):

Material	Standard	Country
A 276 XM-28	SAE	USA
A 313 Type XM-28	SAE	USA
A 314 XM-28	SAE	USA
A 580 Type XM-28	SAE	USA
A 955 XM-28 Grade 280	SAE	USA
A 955 XM-28 Grade 40	SAE	USA
A 955 XM-28 Grade 420	SAE	USA
A 955 XM-28 Grade 520	SAE	USA
A 955 XM-28 Grade 60	SAE	USA
A 955 XM-28 Grade 75	SAE	USA
A 959 Type XM-28	SAE	USA
SA-276 XM-28	AMS	USA
XM-28	SAE	USA
A 276 S24100	SAE	USA
A 313 S24100	SAE	USA
A 314 S24100	SAE	USA
A 580 S24100	SAE	USA
A 955 S24100	SAE	USA
S24100	AISI	USA
1.4108	AWS	Germany
X 30 CrMoN 15-1, X30CrMoN15-1, 1.4108	AWS	Germany
A 240 S41003	SAE	USA
A 554 S41003	SAE	USA
A 959 S41003	SAE	USA
S41003	AISI	USA
SA-240 S41003	AMS	USA
A 1028 S41000	SAE	USA
A 240 S41000	SAE	USA
A 268 S41000	SAE	USA
A 276 S41000	SAE	USA
A 314 S41000	SAE	USA
A 473 S41000	SAE	USA
A 493 S41000	SAE	USA
A 580 S41000	SAE	USA
A 982 S41000	SAE	USA
A 988 S41000 Class 1	SAE	USA
A 988 S41000 Class 2	SAE	USA
A 988 S41000 Class 3	SAE	USA
A 988 S41000 Class 4	SAE	USA
F 837 Class C1-110 S41000	SAE	USA
F738 Class C1-110 S41000	SAE	USA
F738 Class C1-50 S41000	SAE	USA
F738 Class C1-70 S41000	SAE	USA
F836 Class C1-110 S41000	SAE	USA
F836 Class C1-70 S41000	SAE	USA
SA-240 S41000	AMS	USA
SA-268 S41000	AMS	USA
S41001	AISI	USA
A 240 S41008	SAE	USA
A 473 S41008	SAE	USA

Chemical composition(mass fraction)(wt.%)

Elements	Min.（≥）	Max.（≤）
C		0.15
Mn		1.00
Si		1.00
P		0.04
S		0.03
Cr	11.50	13.50
Ni
Mo

Mechanical Properties

Tensile strength	055～217	σb/MPa
Yield Strength	924	σ 0.2 ≥/MPa
Elongation	88	δ5≥(％)
ψ	-	ψ≥(％)
Akv	-	Akv≥/J
HBS	817～792	-
HRC	30	-

Physical Properties

Thermal expansion	44-83	e-6/K
Thermal conductivity	64-87	W/m.K
Specific heat	450-460	J/kg.K
Melting temperature	4449-4122	째C
Density	5706-1442	kg/m³
Resistivity	0.50-0.60	Ohm.mm²/m

Heat Treatment Regime

Annealing	Quenching	Tempering	Normalizing	Q & T
√	√	√	√	√

Size Availability

Steel Grade	Specification	Processing range(mm)
S41000 Stainless Steels	Round Bar and Hollow Bar	Φ1 to Φ2000
	Square and Flat Steel	Φ10 to Φ100
	Plate and Sheet	0.08-800(Thickness)10-1500(Width)Length
	Tube or Pipe	OD:Φ4-410; WT:1-35 mm; Lenght:10-12000
	Coil and Strip Steel	THK:0.1mm Width:1500mm
	Forged	Ring/Cylindrical/Disk