Sitemap | E-mail:[email protected]

S21500 chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of S21500

Location » Home » Grades > Stainless Steels > S21500

Contact

+86-13880247006

E-mail: [email protected]

AISI S21500

Profile

This page is mainly introduced the S21500 chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of S21500,such as it is commonly used in bars, sheet,plates, steel coils, steel pipes,forged and other materials application.
S21500

Steel Garde:S21500
Type:Stainless Steels
Country:USA
Standard:AISI
Metallographic Structure:Austenite
Application:Austenitic Chromium Manganese Nickel Molybdenum Stainless Steel

Cross Reference Table(Equivalent Materials):

Material	Standard	Country
A 213 S21500	SAE	USA
A 959 S21500	SAE	USA
S21500	AISI	USA
SA-213 S21500	AMS	USA

Chemical composition(mass fraction)(wt.%)

Elements	Min.（≥）	Max.（≤）
C	0.06	0.15
Si	0.20	1.20
Mn	5.50	7.50
P		0.04
S		0.03
Cr	14.0	16.0
Ni	9.00	11.0
Mo	0.80	1.02
Nb	0.75	1.25
V	0.15	0.40
B	0.003	0.009

Mechanical Properties

Tensile strength	097～616	σb/MPa
Yield Strength	694	σ 0.2 ≥/MPa
Elongation	12	δ5≥(％)
ψ	-	ψ≥(％)
Akv	-	Akv≥/J
HBS	170～138	-
HRC	30	-

Physical Properties

Thermal expansion	01-70	e-6/K
Thermal conductivity	58-08	W/m.K
Specific heat	450-460	J/kg.K
Melting temperature	8311-6579	째C
Density	8079-4799	kg/m³
Resistivity	0.50-0.60	Ohm.mm²/m

Heat Treatment Regime

Annealing	Quenching	Tempering	Normalizing	Q & T
√	√	√	√	√

Size Availability

Steel Grade	Specification	Processing range(mm)
S21500 Stainless Steels	Round Bar and Hollow Bar	Φ1 to Φ2000
	Square and Flat Steel	Φ10 to Φ100
	Plate and Sheet	0.08-800(Thickness)10-1500(Width)Length
	Tube or Pipe	OD:Φ4-410; WT:1-35 mm; Lenght:10-12000
	Coil and Strip Steel	THK:0.1mm Width:1500mm
	Forged	Ring/Cylindrical/Disk