+86-13880247006
E-mail: sales@longhaisteel.com
| ITEM | Standard Number | Descriptions |
|---|---|---|
| 1 | A 29/A 29M (2012) | Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | 0.08 | 0.15 | ||
| Si | 0.75 | |||
| Mn | 1.00 | 2.00 | ||
| P | ||||
| S | 0.03 | |||
| Ni | 8.50 | 10.50 | ||
| Cr | 27.00 | 31.00 | ||
| Al | ||||
| Cu | 0.50 | |||
| Ti | ||||
| Fe | ||||
| N | ||||
| Mo | 0.50 |
| Tensile strength | 927～540 | σb/MPa |
| Yield Strength | 534 | σ 0.2 ≥/MPa |
| Elongation | 34 | δ5≥(％) |
| ψ | - | ψ≥(％) |
| Akv | - | Akv≥/J |
| HBS | 041～267 | - |
| HRC | 30 | - |
| Thermal expansion | 79-18 | e-6/K |
| Thermal conductivity | 17-03 | W/m.K |
| Specific heat | 450-460 | J/kg.K |
| Melting temperature | 0498-6541 | 째C |
| Density | 7736-4399 | kg/m3 |
| Resistivity | 0.50-0.60 | Ohm.mm2/m |
| Steel Grade | Specification | Processing range(mm) |
| A 29 94B17 Stainless Steels | Round Bar and Hollow Bar | Φ1 to Φ2000 |
| Square and Flat Steel | Φ10 to Φ100 | |
| Plate and Sheet | 0.08-800(Thickness)*10-1500(Width)*Length | |
| Tube or Pipe | OD:Φ4-410; WT:1-35 mm; Lenght:10-12000 | |
| Coil and Strip Steel | THK:0.1mm Width:1500mm | |
| Forged | Ring/Cylindrical/Disk |