+86-13880247006
E-mail: [email protected]
| ITEM | Standard Number | Descriptions |
|---|---|---|
| 1 | A 240/A 240M (2012) | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| 2 | A 554 (2011) | Welded Stainless Steel Mechanical Tubing |
| 3 | A 666 (2010) | Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar |
| 4 | A 959 (2011) | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels |
| 5 | SAE J 405 (1998) | Chemical compositions of SAE wrought stainless steels |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | 0.15 | |||
| Si | 1.00 | |||
| Mn | 2.00 | |||
| P | 0.045 | |||
| S | 0.03 | |||
| Cr | 16.0 | 18.0 | ||
| Ni | 6.00 | 8.00 |
| Tensile strength | 286～008 | σb/MPa |
| Yield Strength | 216 | σ 0.2 ≥/MPa |
| Elongation | 24 | δ5≥(％) |
| ψ | - | ψ≥(％) |
| Akv | - | Akv≥/J |
| HBS | 268～433 | - |
| HRC | 30 | - |
| Thermal expansion | 69-33 | e-6/K |
| Thermal conductivity | 05-37 | W/m.K |
| Specific heat | 450-460 | J/kg.K |
| Melting temperature | 1417-2898 | 째C |
| Density | 4502-8604 | kg/m3 |
| Resistivity | 0.50-0.60 | Ohm.mm2/m |
| Steel Grade | Specification | Processing range(mm) |
| 301 Stainless Steels | Round Bar and Hollow Bar | Φ1 to Φ2000 |
| Square and Flat Steel | Φ10 to Φ100 | |
| Plate and Sheet | 0.08-800(Thickness)*10-1500(Width)*Length | |
| Tube or Pipe | OD:Φ4-410; WT:1-35 mm; Lenght:10-12000 | |
| Coil and Strip Steel | THK:0.1mm Width:1500mm | |
| Forged | Ring/Cylindrical/Disk |
