+86-13880247006
E-mail: [email protected]
| ITEM | Standard Number | Descriptions |
|---|---|---|
| 1 | SA/EN 10028-7 | Specification for flat products made of steels for pressure purposes - Part 7: Stainless steels |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | 0.15 | |||
| Si | 1.00 | |||
| Mn | 3.75 | 4.75 | ||
| P | 0.045 | |||
| S | 0.03 | |||
| Ni | 9.00 | 10.50 | ||
| Cr | 19.00 | 22.00 | ||
| Al | ||||
| Cu | ||||
| Ti | ||||
| Fe | ||||
| N | ||||
| Mo | ||||
| V |
| Tensile strength | 345～878 | σb/MPa |
| Yield Strength | 708 | σ 0.2 ≥/MPa |
| Elongation | 44 | δ5≥(％) |
| ψ | - | ψ≥(％) |
| Akv | - | Akv≥/J |
| HBS | 301～320 | - |
| HRC | 30 | - |
| Thermal expansion | 94-52 | e-6/K |
| Thermal conductivity | 49-33 | W/m.K |
| Specific heat | 450-460 | J/kg.K |
| Melting temperature | 1403-0537 | 째C |
| Density | 6641-5774 | kg/m3 |
| Resistivity | 0.50-0.60 | Ohm.mm2/m |
| Steel Grade | Specification | Processing range(mm) |
| 1.4307 Stainless Steels | Round Bar and Hollow Bar | Φ1 to Φ2000 |
| Square and Flat Steel | Φ10 to Φ100 | |
| Plate and Sheet | 0.08-800(Thickness)*10-1500(Width)*Length | |
| Tube or Pipe | OD:Φ4-410; WT:1-35 mm; Lenght:10-12000 | |
| Coil and Strip Steel | THK:0.1mm Width:1500mm | |
| Forged | Ring/Cylindrical/Disk |
