Sitemap | E-mail:[email protected]

K41910 chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of K41910

Location » Home » Grades > Stainless Steels > K41910

Contact

+86-13880247006

E-mail: [email protected]

AISI K41910

Profile

This page is mainly introduced the K41910 chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of K41910,such as it is commonly used in bars, sheet,plates, steel coils, steel pipes,forged and other materials application.
Ni-Mo Arc Welding Electrode 3N1C (Hastelloy C)

Steel Garde:K41910
Type:Stainless Steels
Country:USA
Standard:AISI
Metallographic Structure:Precipitation-Hardening
Application:Ni-Mo Arc Welding Electrode 3N1C (Hastelloy C)

Cross Reference Table(Equivalent Materials):

Material	Standard	Country
4419	YB	USA
4419	YB	USA
4419	YB	USA
4419	UNS	USA
H44190	AISI	USA
W84190	AISI	USA

Chemical composition(mass fraction)(wt.%)

Elements	Min.（≥）	Max.（≤）	Similar	Remarks
C		0.25
Si		0.30
Mn		1.00
P
S
Ni		0.50
Cr		11.50
Al
Cu
Ti
Fe		remaining
N
Mo		0.50
W		0.25
V		0.40

Mechanical Properties

Tensile strength	871～959	σb/MPa
Yield Strength	803	σ 0.2 ≥/MPa
Elongation	45	δ5≥(％)
ψ	-	ψ≥(％)
Akv	-	Akv≥/J
HBS	943～466	-
HRC	30	-

Physical Properties

Thermal expansion	90-29	e-6/K
Thermal conductivity	49-21	W/m.K
Specific heat	450-460	J/kg.K
Melting temperature	2030-8846	째C
Density	2320-1744	kg/m³
Resistivity	0.50-0.60	Ohm.mm²/m

Heat Treatment Regime

Annealing	Quenching	Tempering	Normalizing	Q & T
√	√	√	√	√

Size Availability

Steel Grade	Specification	Processing range(mm)
K41910 Stainless Steels	Round Bar and Hollow Bar	Φ1 to Φ2000
	Square and Flat Steel	Φ10 to Φ100
	Plate and Sheet	0.08-800(Thickness)10-1500(Width)Length
	Tube or Pipe	OD:Φ4-410; WT:1-35 mm; Lenght:10-12000
	Coil and Strip Steel	THK:0.1mm Width:1500mm
	Forged	Ring/Cylindrical/Disk