Sitemap | E-mail:sales@steelgs.com

AF 1410 chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of AF 1410

Location » Home » Grades > Stainless Steels > AF 1410

Contact

+86-13880247006

E-mail: sales@longhaisteel.com

UNS AF 1410

Profile

This page is mainly introduced the AF 1410 chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of AF 1410,such as it is commonly used in bars, sheet,plates, steel coils, steel pipes,forged and other materials application.
Steel, Bars and Forgings 2.0Cr - 10Ni - 14Co - 1.0Mo (0.15 - 0.19C) Vacuum Melted, Normalized and Overaged

Steel Garde:AF 1410
Type:Stainless Steels
Country:USA
Standard:UNS

Standard Number:

ITEM	Standard Number	Descriptions
1	SAE AMS 6527E (2013)	Steel, Bars and Forgings 2.0Cr - 10Ni - 14Co - 1.0Mo (0.15 - 0.19C) Vacuum Melted, Normalized and Overaged

Metallographic Structure:Precipitation-Hardening
Application:Steel, Bars and Forgings 2.0Cr - 10Ni - 14Co - 1.0Mo (0.15 - 0.19C) Vacuum Melted, Normalized and Overaged

Cross Reference Table(Equivalent Materials):

Material	Standard	Country
AF 1410	ASTM	USA
AF 1410	ASTM	USA
AF 1410	ASTM	USA
AF 1410	UNS	USA
AF 1410	UNS	USA

Chemical composition(mass fraction)(wt.%)

Elements	Min.（≥）	Max.（≤）
C	0.13	0.17
Si		0.10
Mn		0.10
P		0.008
S		0.005
Ni	9.50	10.50
Cr	1.80	2.20
Al		0.015
Cu
Ti		0.015
Fe
N		0.0015
Mo	0.90	1.10
W
O		0.0015
Co	13.50	14.50

Mechanical Properties

Tensile strength	717～362	σb/MPa
Yield Strength	865	σ 0.2 ≥/MPa
Elongation	82	δ5≥(％)
ψ	-	ψ≥(％)
Akv	-	Akv≥/J
HBS	744～860	-
HRC	30	-

Physical Properties

Thermal expansion	47-73	e-6/K
Thermal conductivity	92-42	W/m.K
Specific heat	450-460	J/kg.K
Melting temperature	2677-3168	째C
Density	6110-6759	kg/m³
Resistivity	0.50-0.60	Ohm.mm²/m

Heat Treatment Regime

Annealing	Quenching	Tempering	Normalizing	Q & T
√	√	√	√	√

Size Availability

Steel Grade	Specification	Processing range(mm)
AF 1410 Stainless Steels	Round Bar and Hollow Bar	Φ1 to Φ2000
	Square and Flat Steel	Φ10 to Φ100
	Plate and Sheet	0.08-800(Thickness)10-1500(Width)Length
	Tube or Pipe	OD:Φ4-410; WT:1-35 mm; Lenght:10-12000
	Coil and Strip Steel	THK:0.1mm Width:1500mm
	Forged	Ring/Cylindrical/Disk