Sitemap | E-mail:[email protected]

H11 chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of H11

Location » Home » Grades > Stainless Steels > H11

Contact

+86-13880247006

E-mail: [email protected]

ASTM H11

Profile

This page is mainly introduced the H11 chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of H11,such as it is commonly used in bars, sheet,plates, steel coils, steel pipes,forged and other materials application.
Steel, Bars, and Forgings 5.0Cr - 1.3Mo - 0.50V (0.38 - 0.43C) (H-11) Consumable Electrode Vacuum Melted

Steel Garde:H11
Type:Stainless Steels
Country:USA
Standard:ASTM

Standard Number:

ITEM	Standard Number	Descriptions
1	SAE AMS 6487K (2012)	Steel, Bars, and Forgings 5.0Cr - 1.3Mo - 0.50V (0.38 - 0.43C) (H-11) Consumable Electrode Vacuum Melted

Metallographic Structure:Precipitation-Hardening
Application:Steel, Bars, and Forgings 5.0Cr - 1.3Mo - 0.50V (0.38 - 0.43C) (H-11) Consumable Electrode Vacuum Melted

Relevant products:

Incoloy800 round bar

Cross Reference Table(Equivalent Materials):

Material	Standard	Country
A 646 Grade H-11	SAE	USA
A 43 Fh 11	SAE	USA
A 681 H11	SAE	USA
EH-11	UNS	USA
EH11K	International	USA
H11	ASTM	USA
H11	ASTM	USA
H11	ASTM	USA
H11	UNS	USA
H11	UNS	USA
H11	UNS	USA
H11	UNS	USA
H11	UNS	USA
H11	UNS	USA
H11	UNS	USA
SUH 11	UNS	USA
SUH 11M	UNS	USA

Chemical composition(mass fraction)(wt.%)

Elements	Min.（≥）	Max.（≤）	Similar	Remarks
C		0.40
Si		0.90
Mn		0.30
P
S
Ni
Cr		5.00
Al
Cu
Ti
Fe		remaining
Mo		1.30
Co
V		0.50

Mechanical Properties

Tensile strength	749～192	σb/MPa
Yield Strength	293	σ 0.2 ≥/MPa
Elongation	30	δ5≥(％)
ψ	-	ψ≥(％)
Akv	-	Akv≥/J
HBS	746～282	-
HRC	30	-

Physical Properties

Thermal expansion	69-72	e-6/K
Thermal conductivity	15-58	W/m.K
Specific heat	450-460	J/kg.K
Melting temperature	9057-6719	째C
Density	2088-2992	kg/m³
Resistivity	0.50-0.60	Ohm.mm²/m

Heat Treatment Regime

Annealing	Quenching	Tempering	Normalizing	Q & T
√	√	√	√	√

Size Availability

Steel Grade	Specification	Processing range(mm)
H11 Stainless Steels	Round Bar and Hollow Bar	Φ1 to Φ2000
	Square and Flat Steel	Φ10 to Φ100
	Plate and Sheet	0.08-800(Thickness)10-1500(Width)Length
	Tube or Pipe	OD:Φ4-410; WT:1-35 mm; Lenght:10-12000
	Coil and Strip Steel	THK:0.1mm Width:1500mm
	Forged	Ring/Cylindrical/Disk