+86-13880247006
E-mail: sales@longhaisteel.com
| ITEM | Standard Number | Descriptions |
|---|---|---|
| 1 | DIN EN 10088-1 | Stainless steels - Part 1: List of stainless steels |
| 2 | DIN EN 10088-2 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| 3 | DIN EN 10088-3 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| 4 | DIN EN 10088-4 | Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
| 5 | DIN EN 10088-5 | Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes |
| 6 | DIN 1654-5 (1955) | Cold heading and cold extruding steels; technical delivery conditions for stainless steels |
| 7 | DIN 17440 (1955) | Stainless steels - Technical delivery conditions for drawn wire |
| 8 | DIN 17441 (1955) | Stainless steels - Technical delivery conditions for cold rolled strips and slit coils strip and sheets cut from such strips for pressure purposes |
| 9 | DIN 17455 (1955) | Welded circular tubes of stainless steels for general requirements; technical delivery conditions |
| 10 | DIN 17456 (1955) | Seamless circular tubes of stainless steels for general requirements; technical delivery conditions |
| 11 | DIN 17457 (1985) | Welded circular tubes of austenitic stainless steels for special requirements; technical delivery conditions |
| 12 | DIN 17458 (1985) | Seamless circular tubes of austenitic stainless steels for special requirements; technical delivery conditions |
| 13 | DIN EN 10028-7 | Flat products made of steels for pressure purposes - Part 7: Stainless steels |
| 14 | DIN EN 10216-5 (2004) | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
| 15 | DIN EN 10217-7 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
| 16 | DIN EN 10222-5 | Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels |
| 17 | DIN EN 10250-4 | Open die steel forgings for general engineering purposes - Part 4: Stainless steels |
| 18 | DIN EN 10253-3 | Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements |
| 19 | DIN EN 10253-4 | Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements |
| 20 | DIN EN 10272 | Stainless steel bars for pressure purposes |
| 21 | DIN EN 10296-2 (2005) | Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel |
| 22 | DIN EN 10297-2 (2005) | Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel |
| Material | Standard | Country |
| X2CrNiN18-10 | AWS | Germany |
| X2CrNiN18-10 | B.S. | UK |
| 1.4311 | B.S. | UK |
| X2CrNiN18-10 | AFNOR | France |
| 1.4311 | AFNOR | France |
| X2CrNiN18-10 | ISO | International |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | 0.030 | |||
| Si | 1.00 | |||
| Mn | 2.00 | |||
| P | 0.045 | |||
| S | 0.015 | |||
| Cr | 17.0 | 19.5 | ||
| Ni | 8.50 | 11.5 | ||
| N | 0.12 | 0.22 |
| Tensile strength | 815～655 | σb/MPa |
| Yield Strength | 866 | σ 0.2 ≥/MPa |
| Elongation | 61 | δ5≥(％) |
| ψ | - | ψ≥(％) |
| Akv | - | Akv≥/J |
| HBS | 127～311 | - |
| HRC | 30 | - |
| Thermal expansion | 56-10 | e-6/K |
| Thermal conductivity | 13-42 | W/m.K |
| Specific heat | 450-460 | J/kg.K |
| Melting temperature | 1634-9422 | 째C |
| Density | 4101-2186 | kg/m3 |
| Resistivity | 0.50-0.60 | Ohm.mm2/m |
| Steel Grade | Specification | Processing range(mm) |
| 1.4311 Stainless Steels | Round Bar and Hollow Bar | Φ1 to Φ2000 |
| Square and Flat Steel | Φ10 to Φ100 | |
| Plate and Sheet | 0.08-800(Thickness)*10-1500(Width)*Length | |
| Tube or Pipe | OD:Φ4-410; WT:1-35 mm; Lenght:10-12000 | |
| Coil and Strip Steel | THK:0.1mm Width:1500mm | |
| Forged | Ring/Cylindrical/Disk |