Sitemap | E-mail:sales@steelgs.com

Waspaloy chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of Waspaloy

Location » Home » Grades > Stainless Steels > Waspaloy

Contact

+86-13880247006

E-mail: sales@longhaisteel.com

AMS Waspaloy

Profile

This page is mainly introduced the Waspaloy chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of Waspaloy,such as it is commonly used in bars, sheet,plates, steel coils, steel pipes,forged and other materials application.
Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 58Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode Remelted or Vacuum Induction Melted 1825 to 1900°F (996 to 1038°C) Solution, Stabilization, and Precipitation Heat Treated

Steel Garde:Waspaloy
Type:Stainless Steels
Country:USA
Standard:AMS

Standard Number:

ITEM	Standard Number	Descriptions
1	SAE AMS 5707L (2008)	Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 58Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode Remelted or Vacuum Induction Melted 1825 to 1900°F (996 to 1038°C) Solution, Stabilization, and Precipitation Heat Treated

Metallographic Structure:Precipitation-Hardening
Application:Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 58Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode Remelted or Vacuum Induction Melted 1825 to 1900°F (996 to 1038°C) Solution, Stabilization, and Pre

Relevant products:

waspaloy round bar

Cross Reference Table(Equivalent Materials):

Material	Standard	Country
Waspaloy	AMS	USA
Waspaloy	AMS	USA
Waspaloy	AMS	USA
Waspaloy	AMS	USA
Waspaloy	AMS	USA
Waspaloy	AMS	USA
Waspaloy	AMS	USA
Waspaloy	SAE	USA
Waspaloy	SAE	USA
Waspaloy	SAE	USA
Waspaloy	SAE	USA
Waspaloy	SAE	USA
Waspaloy	SAE	USA
Waspaloy	SAE	USA
Waspaloy	SAE	USA
Waspaloy	SAE	USA
Waspaloy	SAE	USA

Chemical composition(mass fraction)(wt.%)

Elements	Min.（≥）	Max.（≤）	Similar	Remarks
C		0.07
Si		0.10
Mn		0.10
Cr		19.75
Ni		remaining
Mo		4.45
Co		14.00
W
Al		1.40
Cu
Ti		3.00
Fe		0.75
B		0.005
Zr		0.04

Mechanical Properties

Tensile strength	992～363	σb/MPa
Yield Strength	635	σ 0.2 ≥/MPa
Elongation	04	δ5≥(％)
ψ	-	ψ≥(％)
Akv	-	Akv≥/J
HBS	894～749	-
HRC	30	-

Physical Properties

Thermal expansion	63-55	e-6/K
Thermal conductivity	84-61	W/m.K
Specific heat	450-460	J/kg.K
Melting temperature	4603-4432	째C
Density	1900-6962	kg/m³
Resistivity	0.50-0.60	Ohm.mm²/m

Heat Treatment Regime

Annealing	Quenching	Tempering	Normalizing	Q & T
√	√	√	√	√

Size Availability

Steel Grade	Specification	Processing range(mm)
Waspaloy Stainless Steels	Round Bar and Hollow Bar	Φ1 to Φ2000
	Square and Flat Steel	Φ10 to Φ100
	Plate and Sheet	0.08-800(Thickness)10-1500(Width)Length
	Tube or Pipe	OD:Φ4-410; WT:1-35 mm; Lenght:10-12000
	Coil and Strip Steel	THK:0.1mm Width:1500mm
	Forged	Ring/Cylindrical/Disk