+86-13880247006
E-mail: [email protected]
Steel, Corrosion Resistant, Bars, Wire, Shapes, and Forgings
| ITEM | Standard Number | Descriptions |
|---|---|---|
| 1 | SAE AMS-QQ-S-763B (1998) | Steel, Corrosion Resistant, Bars, Wire, Shapes, and Forgings |
| 2 | SAE AMS-T-6845A (1999) | Tubing, Steel, Corrosion-Resistant (S30400), Aerospace Vehicle Hydraulic System 1/8 Hard Condition |
| 3 | SAE AMS-T-8506B (1999) | Tubing, Steel, Corrosion-Resistant, (304), Annealed, Seamless and Welded |
| 4 | SAE J 2515 (1999) | High temperature materials for exhaust manifolds |
| 5 | SAE J 405 (1998) | Chemical compositions of SAE wrought stainless steels |
| 6 | SAE J 467 (1968) | Special Purpose Alloys ("Superalloys") |
| 7 | SAE J 452 | Chemical compositions, mechanical and physical properties of SAE aluminum casting alloys |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | 0.08 | |||
| Si | 1.00 | |||
| Mn | 2.00 | |||
| P | 0.045 | |||
| S | 0.03 | |||
| Cr | 18.0 | 20.0 | ||
| Ni | 8.00 | 10.5 | ||
| N | 0.10 |
| Tensile strength | 500～975 | σb/MPa |
| Yield Strength | 954 | σ 0.2 ≥/MPa |
| Elongation | 32 | δ5≥(％) |
| ψ | - | ψ≥(％) |
| Akv | - | Akv≥/J |
| HBS | 766～503 | - |
| HRC | 30 | - |
| Thermal expansion | 97-74 | e-6/K |
| Thermal conductivity | 46-96 | W/m.K |
| Specific heat | 450-460 | J/kg.K |
| Melting temperature | 2572-1642 | 째C |
| Density | 0194-6628 | kg/m3 |
| Resistivity | 0.50-0.60 | Ohm.mm2/m |
| Steel Grade | Specification | Processing range(mm) |
| 304 Stainless Steels | Round Bar and Hollow Bar | Φ1 to Φ2000 |
| Square and Flat Steel | Φ10 to Φ100 | |
| Plate and Sheet | 0.08-800(Thickness)*10-1500(Width)*Length | |
| Tube or Pipe | OD:Φ4-410; WT:1-35 mm; Lenght:10-12000 | |
| Coil and Strip Steel | THK:0.1mm Width:1500mm | |
| Forged | Ring/Cylindrical/Disk |
