Sitemap | E-mail:sales@steelgs.com

X1CrNi25-21 chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of X1CrNi25-21

Location » Home » Grades > Stainless Steels > X1CrNi25-21

Contact

+86-13880247006

E-mail: sales@longhaisteel.com

DIN X1CrNi25-21

Profile

This page is mainly introduced the X1CrNi25-21 chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of X1CrNi25-21,such as it is commonly used in bars, sheet,plates, steel coils, steel pipes,forged and other materials application.
Flat products made of steels for pressure purposes - Part 7: Stainless steels

Steel Garde:X1CrNi25-21
Type:Stainless Steels
Country:Germany
Standard:DIN

Standard Number:

ITEM	Standard Number	Descriptions
1	DIN EN 10028-7	Flat products made of steels for pressure purposes - Part 7: Stainless steels
2	DIN EN 10088-1	Stainless steels - Part 1: List of stainless steels
3	DIN EN 10088-2	Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
4	DIN EN 10088-3	Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
5	DIN EN 10088-4	Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
6	DIN EN 10216-5 (2004)	Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
7	DIN EN 10253-3	Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
8	DIN EN 10253-4	Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
9	DIN EN 10297-2 (2005)	Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel

Application:Flat products made of steels for pressure purposes - Part 7: Stainless steels

Cross Reference Table(Equivalent Materials):

Material	Standard	Country
1.4335	DIN	Germany
X1CrNi25-21	AFNOR	France
1.4335	AFNOR	France

Chemical composition(mass fraction)(wt.%)

Elements	Min.（≥）	Max.（≤）
C		0.05
Si		0.70
Mn		1.50
P		0.040
S		0.015
Cr	12.0	14.0
Mo	0.30	0.70
Ni	3.50	4.50
N		0.020

Mechanical Properties

Tensile strength	410～199	σb/MPa
Yield Strength	946	σ 0.2 ≥/MPa
Elongation	91	δ5≥(％)
ψ	-	ψ≥(％)
Akv	-	Akv≥/J
HBS	958～408	-
HRC	30	-

Physical Properties

Thermal expansion	87-29	e-6/K
Thermal conductivity	02-96	W/m.K
Specific heat	450-460	J/kg.K
Melting temperature	5809-2609	째C
Density	9429-4683	kg/m³
Resistivity	0.50-0.60	Ohm.mm²/m

Heat Treatment Regime

Annealing	Quenching	Tempering	Normalizing	Q & T
√	√	√	√	√

Size Availability

Steel Grade	Specification	Processing range(mm)
X1CrNi25-21 Stainless Steels	Round Bar and Hollow Bar	Φ1 to Φ2000
	Square and Flat Steel	Φ10 to Φ100
	Plate and Sheet	0.08-800(Thickness)10-1500(Width)Length
	Tube or Pipe	OD:Φ4-410; WT:1-35 mm; Lenght:10-12000
	Coil and Strip Steel	THK:0.1mm Width:1500mm
	Forged	Ring/Cylindrical/Disk