+86-13880247006
E-mail: sales@longhaisteel.com
| ITEM | Standard Number | Descriptions |
|---|---|---|
| 1 | NF EN 10028-7 | Flat products made of steels for pressure purposes - Part 7: Stainless steels |
| 2 | NF EN 10088-1 | Stainless steels - Part 1: List of stainless steels |
| 3 | NF EN 10088-2 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| 4 | NF EN 10088-3 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| 5 | NF EN 10216-5 (2004) | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
| 6 | NF EN 10250-4 | Open die steel forgings for general engineering purposes - Part 4: Stainless steels |
| 7 | NF EN 10253-3 | Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements |
| 8 | NF EN 10253-4 | Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements |
| 9 | NF EN 10272 | Stainless steel bars for pressure purposes |
| 10 | NF EN 10297-2 (2005) | Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel |
| Material | Standard | Country |
| X2CrNiMoCuN25-6-3 | B.S. | UK |
| 1.4507 | B.S. | UK |
| X2CrNiMoCuN25-6-3 | AFNOR | France |
| 1.4507, X2CrNiMoCuN25-6-3, UNS S32550 | EN | European |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | 0.030 | |||
| Si | 0.70 | |||
| Mn | 2.00 | |||
| P | 0.035 | |||
| S | 0.015 | |||
| Cr | 24.00 | 26.00 | ||
| Mo | 2.70 | 4.00 | ||
| Ni | 5.50 | 7.50 | ||
| N | 0.15 | 0.30 | ||
| Cu | 1.00 | 2.50 |
| Tensile strength | 944～013 | σb/MPa |
| Yield Strength | 666 | σ 0.2 ≥/MPa |
| Elongation | 91 | δ5≥(％) |
| ψ | - | ψ≥(％) |
| Akv | - | Akv≥/J |
| HBS | 588～278 | - |
| HRC | 30 | - |
| Thermal expansion | 37-54 | e-6/K |
| Thermal conductivity | 98-28 | W/m.K |
| Specific heat | 450-460 | J/kg.K |
| Melting temperature | 9178-4349 | 째C |
| Density | 5847-4029 | kg/m3 |
| Resistivity | 0.50-0.60 | Ohm.mm2/m |
| Steel Grade | Specification | Processing range(mm) |
| 1.4507 Stainless Steels | Round Bar and Hollow Bar | Φ1 to Φ2000 |
| Square and Flat Steel | Φ10 to Φ100 | |
| Plate and Sheet | 0.08-800(Thickness)*10-1500(Width)*Length | |
| Tube or Pipe | OD:Φ4-410; WT:1-35 mm; Lenght:10-12000 | |
| Coil and Strip Steel | THK:0.1mm Width:1500mm | |
| Forged | Ring/Cylindrical/Disk |
