Sitemap | E-mail:sales@steelgs.com

1.4913 chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of 1.4913

Location » Home » Grades > Stainless Steels > 1.4913

Contact

+86-13880247006

E-mail: sales@longhaisteel.com

AFNOR 1.4913

Profile

This page is mainly introduced the 1.4913 chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of 1.4913,such as it is commonly used in bars, sheet,plates, steel coils, steel pipes,forged and other materials application.
Creep resisting steels, nickel and cobalt alloys

Steel Garde:1.4913
Type:Stainless Steels
Country:France
Standard:AFNOR

Standard Number:

ITEM	Standard Number	Descriptions
1	NF EN 10088-1	Stainless steels - Part 1: List of stainless steels
2	NF EN 10269	Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
3	NF EN 10302 (2002)	Creep resisting steels, nickel and cobalt alloys

Application:Creep resisting steels, nickel and cobalt alloys

Relevant products:

X19CrMoVNbN11-1 /...

Cross Reference Table(Equivalent Materials):

Material	Standard	Country
X 19 CrMoNbVN 11-1	AWS	Germany
X19CrMoNbVN11-1	AFNOR	France
X19CrMoNbVN11-1,1.4913	DIN	Germany
X19CrMoVNbN11-1	DIN	Germany
1.4913	DIN	Germany

Chemical composition(mass fraction)(wt.%)

Elements	Min.（≥）	Max.（≤）
C	0.17	0.23
Si		0.50
Mn	0.40	0.90
P		0.025
S		0.015
Cr	10.00	11.50
Ni	0.20	0.60
Mo	0.50	0.80
V	0.10	0.30
Al		0.02
B		0.0015
N	0.05	0.10

Mechanical Properties

Tensile strength	501～489	σb/MPa
Yield Strength	263	σ 0.2 ≥/MPa
Elongation	52	δ5≥(％)
ψ	-	ψ≥(％)
Akv	-	Akv≥/J
HBS	038～884	-
HRC	30	-

Physical Properties

Thermal expansion	91-06	e-6/K
Thermal conductivity	95-93	W/m.K
Specific heat	450-460	J/kg.K
Melting temperature	8870-1930	째C
Density	5145-6076	kg/m³
Resistivity	0.50-0.60	Ohm.mm²/m

Heat Treatment Regime

Annealing	Quenching	Tempering	Normalizing	Q & T
√	√	√	√	√

Size Availability

Steel Grade	Specification	Processing range(mm)
1.4913 Stainless Steels	Round Bar and Hollow Bar	Φ1 to Φ2000
	Square and Flat Steel	Φ10 to Φ100
	Plate and Sheet	0.08-800(Thickness)10-1500(Width)Length
	Tube or Pipe	OD:Φ4-410; WT:1-35 mm; Lenght:10-12000
	Coil and Strip Steel	THK:0.1mm Width:1500mm
	Forged	Ring/Cylindrical/Disk