Sitemap | E-mail:sales@steelgs.com

Ni-Mo16Cr-15 chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of Ni-Mo16Cr-15

Location » Home » Grades > Stainless Steels > Ni-Mo16Cr-15

Contact

+86-13880247006

E-mail: sales@longhaisteel.com

AFNOR Ni-Mo16Cr-15

Profile

This page is mainly introduced the Ni-Mo16Cr-15 chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of Ni-Mo16Cr-15,such as it is commonly used in bars, sheet,plates, steel coils, steel pipes,forged and other materials application.
Nickel and nickel alloys. Nickel-molybdenum and nickel-molybdenum- chromium-alloys

Steel Garde:Ni-Mo16Cr-15
Type:Stainless Steels
Country:France
Standard:AFNOR
Standard Number:

ITEM Standard Number Descriptions

1 NF A 54-401 Nickel and nickel alloys. Nickel-molybdenum and nickel-molybdenum- chromium-alloys
Application:Nickel and nickel alloys. Nickel-molybdenum and nickel-molybdenum- chromium-alloys

ITEM	Standard Number	Descriptions
1	NF A 54-401	Nickel and nickel alloys. Nickel-molybdenum and nickel-molybdenum- chromium-alloys

Cross Reference Table(Equivalent Materials):

Material	Standard	Country
Ni-Mo16Cr-15C	AFNOR	France

Chemical composition(mass fraction)(wt.%)

Elements	Min.（≥）	Max.（≤）
C		0.02
Si		0.05
Mn		1.00
P		0.030
S		0.030
Cr	14.50	16.50
Ni		remaining
Mo	15.00	17.00
V		0.35
Co		2.50
W	3.00	4.50

Mechanical Properties

Tensile strength	850～189	σb/MPa
Yield Strength	171	σ 0.2 ≥/MPa
Elongation	70	δ5≥(％)
ψ	-	ψ≥(％)
Akv	-	Akv≥/J
HBS	533～401	-
HRC	30	-

Physical Properties

Thermal expansion	92-27	e-6/K
Thermal conductivity	68-66	W/m.K
Specific heat	450-460	J/kg.K
Melting temperature	9127-7138	째C
Density	1519-0707	kg/m³
Resistivity	0.50-0.60	Ohm.mm²/m

Heat Treatment Regime

Annealing	Quenching	Tempering	Normalizing	Q & T
√	√	√	√	√

Size Availability

Steel Grade	Specification	Processing range(mm)
Ni-Mo16Cr-15 Stainless Steels	Round Bar and Hollow Bar	Φ1 to Φ2000
	Square and Flat Steel	Φ10 to Φ100
	Plate and Sheet	0.08-800(Thickness)10-1500(Width)Length
	Tube or Pipe	OD:Φ4-410; WT:1-35 mm; Lenght:10-12000
	Coil and Strip Steel	THK:0.1mm Width:1500mm
	Forged	Ring/Cylindrical/Disk