Sitemap | E-mail:[email protected]

00Cr17Ni14Mo2 chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of 00Cr17Ni14Mo2

Location » Home » Grades > Stainless Steels > 00Cr17Ni14Mo2

Contact

+86-13880247006

E-mail: [email protected]

GB 00Cr17Ni14Mo2

Profile

This page is mainly introduced the 00Cr17Ni14Mo2 chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of 00Cr17Ni14Mo2,such as it is commonly used in bars, sheet,plates, steel coils, steel pipes,forged and other materials application.
Stainless and heat resisting steels

Steel Garde:00Cr17Ni14Mo2
Type:Stainless Steels
Country:China
Standard:GB

Standard Number:

ITEM	Standard Number	Descriptions
1	GB 13296 (2007)	Seamless stainless steel tubes for boiler and heat exchanger
2	GB 2270 (1980)	Seamless tubes
3	GB/T 1220 (1992)	Stainless steel bars
4	GB/T 12770 (2002)	Welded stainless steel tubes for machine structures
5	GB/T 12771 (2000)	Welded stainless steel pipes for liquid delivery
6	GB/T 14975 (2002)	Stainless steel seamless tubes for structures
7	GB/T 14976 (2002)	Stainless steel seamless tubes for fluid transport
8	GB/T 3089 (1982)	Thinnest-wall seamless tubes of stainless and acid-resistance steel
9	GB/T 3090 (2000)	Stainless steel small diameter seamless steel tubes
10	GB/T 3280 (2007)	Cold rolled stainless steel sheets and plates
11	GB/T 4226 (2004)	Cold finished stainless steel bars
12	GB/T 4237 (1992)	Hot rolled stainless steel sheets and plates
13	GB/T 4239 (1991)	Cold rolled stainless steel and heat resisting steel strips
14	GB/T 4240 (1993)	Stainless steel wires
15	GB/T 4356 (2002)	Stainless steel wire rods
16	JB 4728 (2000)	Stainless Steel Forgings for Pressure Vessels

Metallographic Structure:Austenite
Application:Austenitic stainless steel. Grade 00Cr17Ni14Mo2 was replaced by new designation 022Cr17Ni12Mo2 according to GB/T 20878 (2007)

Cross Reference Table(Equivalent Materials):

Material	Standard	Country
X2CrNiMo18-14-3	AWS	Germany
1.4435	AWS	Germany
Z 3 CND 17-11-02	DIN	France
TS 60	SS	International
X2CrNiMo18-14-3	B.S.	UK
1.4435	B.S.	UK
X2CrNiMo18-14-3	AFNOR	France
1.4435	AFNOR	France
X2CrNiMo18-15-4	AFNOR	France
1.4438	AFNOR	France
X3CrNiMo17-13-3, 1.4436, X2CrNiMo18-14-3, 1.4435, 1.4432, X2CrNiMo17-12-3	Whole	Whole
Z3CND17-11-02	AFNOR	France
Z3CND17-11-02FF	AFNOR	France

Chemical composition(mass fraction)(wt.%)

Elements	Min.（≥）	Max.（≤）
C		0.030
Si		1.00
Mn		2.00
P		0.035
S		0.030
Ni	12.00	15.00
Cr	16.00	18.00
Mo	2.00	3.00

Mechanical Properties

Tensile strength	493～121	σb/MPa
Yield Strength	793	σ 0.2 ≥/MPa
Elongation	71	δ5≥(％)
ψ	-	ψ≥(％)
Akv	-	Akv≥/J
HBS	839～766	-
HRC	30	-

Physical Properties

Thermal expansion	56-67	e-6/K
Thermal conductivity	70-07	W/m.K
Specific heat	450-460	J/kg.K
Melting temperature	4387-1604	째C
Density	1024-8425	kg/m³
Resistivity	0.50-0.60	Ohm.mm²/m

Heat Treatment Regime

Annealing	Quenching	Tempering	Normalizing	Q & T
√	√	√	√	√

Size Availability

Steel Grade	Specification	Processing range(mm)
00Cr17Ni14Mo2 Stainless Steels	Round Bar and Hollow Bar	Φ1 to Φ2000
	Square and Flat Steel	Φ10 to Φ100
	Plate and Sheet	0.08-800(Thickness)10-1500(Width)Length
	Tube or Pipe	OD:Φ4-410; WT:1-35 mm; Lenght:10-12000
	Coil and Strip Steel	THK:0.1mm Width:1500mm
	Forged	Ring/Cylindrical/Disk