Sitemap | E-mail:sales@steelgs.com

X3CrNiCu18-9-4, 1.4567, 1.4560, X3CrNiCu19-9-2 chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of X3CrNiCu18-9-4, 1.4567, 1.4560, X3CrNiCu19-9-2

Location » Home » Grades > Stainless Steels > X3CrNiCu18-9-4, 1.4567, 1.4560, X3CrNiCu19-9-2

Contact

+86-13880247006

E-mail: sales@longhaisteel.com

EN X3CrNiCu18-9-4, 1.4567, 1.4560, X3CrNiCu19-9-2

Catalog

X3CrNiCu18-9-4, 1.4567, 1.4560, X3CrNiCu19-9-2 Profile
X3CrNiCu18-9-4, 1.4567, 1.4560, X3CrNiCu19-9-2 Chemical composition
X3CrNiCu18-9-4, 1.4567, 1.4560, X3CrNiCu19-9-2 Mechanical Properties
X3CrNiCu18-9-4, 1.4567, 1.4560, X3CrNiCu19-9-2 Physical Properties
X3CrNiCu18-9-4, 1.4567, 1.4560, X3CrNiCu19-9-2 Heat treatment
X3CrNiCu18-9-4, 1.4567, 1.4560, X3CrNiCu19-9-2 Size Availability
X3CrNiCu18-9-4, 1.4567, 1.4560, X3CrNiCu19-9-2 Relevant products

Profile

This page is mainly introduced the X3CrNiCu18-9-4, 1.4567, 1.4560, X3CrNiCu19-9-2 chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of X3CrNiCu18-9-4, 1.4567, 1.4560, X3CrNiCu19-9-2,such as it is commonly used in bars, sheet,plates, steel coils, steel pipes,forged and other materials application.

Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties, used in the chemical, petrochemical, pharmaceutical, machine industries (hydraulic systems) and food industry for valves, flanges, pump parts, springs, heat exchangers, screws and even chains.Austenitic non-magnetic stainless steel with high strength properties - a significant resistance to impact, abrasion and high hardness.The grade can be used for working at elevated temperatures

Steel Garde:X3CrNiCu18-9-4, 1.4567, 1.4560, X3CrNiCu19-9-2
Type:Stainless Steels
Country:European
Standard:EN

Standard Number:

ITEM	Standard Number	Descriptions
1	EN 10088-1	Stainless steels - Part 1: List of stainless steels
2	EN 10088-3	Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
3	EN 10088-5	Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
4	EN 10263-5	Steel rod, bars and steel wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels
5	EN 10269	Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties

Metallographic Structure:Austenite
Application:Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties, used in the chemical, petrochemical, pharmaceutical, machine industries (hydraulic systems) and food industry for valves, flanges, pump parts, springs, heat

Chemical composition(mass fraction)(wt.%)

Elements	Min.（≥）	Max.（≤）
C		0.04
Si		1.00
Mn		2.00
P		0.045
S		0.015
Cr	17.00	19.00
Ni	8.50	10.50
Mo
N		0.11
Cu	3.00	4.00

Mechanical Properties

Tensile strength	482～661	σb/MPa
Yield Strength	067	σ 0.2 ≥/MPa
Elongation	51	δ5≥(％)
ψ	-	ψ≥(％)
Akv	-	Akv≥/J
HBS	672～341	-
HRC	30	-

Physical Properties

Thermal expansion	49-23	e-6/K
Thermal conductivity	59-50	W/m.K
Specific heat	450-460	J/kg.K
Melting temperature	0442-0504	째C
Density	4214-5100	kg/m³
Resistivity	0.50-0.60	Ohm.mm²/m

Heat Treatment Regime

Annealing	Quenching	Tempering	Normalizing	Q & T
√	√	√	√	√

Size Availability

Steel Grade	Specification	Processing range(mm)
X3CrNiCu18-9-4, 1.4567, 1.4560, X3CrNiCu19-9-2 Stainless Steels	Round Bar and Hollow Bar	Φ1 to Φ2000
	Square and Flat Steel	Φ10 to Φ100
	Plate and Sheet	0.08-800(Thickness)10-1500(Width)Length
	Tube or Pipe	OD:Φ4-410; WT:1-35 mm; Lenght:10-12000
	Coil and Strip Steel	THK:0.1mm Width:1500mm
	Forged	Ring/Cylindrical/Disk