Sitemap | E-mail:[email protected]

SA-479 S30815 chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of SA-479 S30815

Location » Home » Grades > Stainless Steels > SA-479 S30815

Contact

+86-13880247006

E-mail: [email protected]

AMS SA-479 S30815

Profile

This page is mainly introduced the SA-479 S30815 chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of SA-479 S30815,such as it is commonly used in bars, sheet,plates, steel coils, steel pipes,forged and other materials application.
Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels

Steel Garde:SA-479 S30815
Type:Stainless Steels
Country:USA
Standard:AMS
Standard Number:

ITEM Standard Number Descriptions

1 SA-479/SA-479M Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
Metallographic Structure:Austenite
Application:Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels

ITEM	Standard Number	Descriptions
1	SA-479/SA-479M	Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels

Cross Reference Table(Equivalent Materials):

Material	Standard	Country
A 167 S30815	SAE	USA
A 213 S30815	SAE	USA
A 240 S30815	SAE	USA
A 249 S30815	SAE	USA
A 276 S30815	SAE	USA
A 312 S30815	SAE	USA
A 358 S30815	SAE	USA
A 409 S30815	SAE	USA
A 473 S30815	SAE	USA
A 479 S30815	SAE	USA
A 813 S30815	SAE	USA
A 814 S30815	SAE	USA
A 943 S30815	SAE	USA
A 959 S30815	SAE	USA
S30815	AISI	USA
SA-213 S30815	AMS	USA
SA-240 S30815	AMS	USA
SA-249 S30815	AMS	USA
SA-276 S30815	AMS	USA
SA-312 S30815	AMS	USA
SA-358 S30815	AMS	USA
SA-409 S30815	AMS	USA
SA-813 S30815	AMS	USA
SA-814 S30815	AMS	USA
A 479 ER308	SAE	USA
A 167 S30815	SAE	USA
A 213 S30815	SAE	USA
A 240 S30815	SAE	USA
A 249 S30815	SAE	USA
A 276 S30815	SAE	USA
A 312 S30815	SAE	USA
A 358 S30815	SAE	USA
A 409 S30815	SAE	USA
A 473 S30815	SAE	USA
A 479 S30815	SAE	USA
A 813 S30815	SAE	USA
A 814 S30815	SAE	USA
A 943 S30815	SAE	USA
A 959 S30815	SAE	USA
S30815	AISI	USA
SA-213 S30815	AMS	USA
SA-240 S30815	AMS	USA
SA-249 S30815	AMS	USA
SA-276 S30815	AMS	USA
SA-312 S30815	AMS	USA
SA-358 S30815	AMS	USA
SA-409 S30815	AMS	USA
SA-479 S30815	AMS	USA
SA-813 S30815	AMS	USA
SA-814 S30815	AMS	USA

Chemical composition(mass fraction)(wt.%)

Elements	Min.（≥）	Max.（≤）
C	0.05	0.10
Si	1.40	2.00
Mn		0.80
P		0.04
S		0.03
Cr	20.0	22.0
Ni	10.00	12.0
N	0.14	0.20
Ce	0.03	0.08

Mechanical Properties

Tensile strength	271～991	σb/MPa
Yield Strength	276	σ 0.2 ≥/MPa
Elongation	86	δ5≥(％)
ψ	-	ψ≥(％)
Akv	-	Akv≥/J
HBS	832～869	-
HRC	30	-

Physical Properties

Thermal expansion	67-94	e-6/K
Thermal conductivity	00-13	W/m.K
Specific heat	450-460	J/kg.K
Melting temperature	9166-6076	째C
Density	1632-3254	kg/m³
Resistivity	0.50-0.60	Ohm.mm²/m

Heat Treatment Regime

Annealing	Quenching	Tempering	Normalizing	Q & T
√	√	√	√	√

Size Availability

Steel Grade	Specification	Processing range(mm)
SA-479 S30815 Stainless Steels	Round Bar and Hollow Bar	Φ1 to Φ2000
	Square and Flat Steel	Φ10 to Φ100
	Plate and Sheet	0.08-800(Thickness)10-1500(Width)Length
	Tube or Pipe	OD:Φ4-410; WT:1-35 mm; Lenght:10-12000
	Coil and Strip Steel	THK:0.1mm Width:1500mm
	Forged	Ring/Cylindrical/Disk