Sitemap | E-mail:[email protected]

A 479 S21800 chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of A 479 S21800

Location » Home » Grades > Stainless Steels > A 479 S21800

Contact

+86-13880247006

E-mail: [email protected]

SAE A 479 S21800

Profile

This page is mainly introduced the A 479 S21800 chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of A 479 S21800,such as it is commonly used in bars, sheet,plates, steel coils, steel pipes,forged and other materials application.

Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels

Steel Garde:A 479 S21800
Type:Stainless Steels
Country:USA
Standard:SAE
Standard Number:

ITEM Standard Number Descriptions

1 A 479/A 479M (2013) Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
Metallographic Structure:Austenite
Application:Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels

ITEM	Standard Number	Descriptions
1	A 479/A 479M (2013)	Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels

Relevant products:

SKD-11 Cold working die steel

$K93600\1.3912\Invar36\4J36 rod coil strip wire$

K93600\1.3912\Inva...

GH 3536 Sheet

GH 605

S31608/316/S31600/1.4401 Tube

Cross Reference Table(Equivalent Materials):

Material	Standard	Country
A 240 S20910	SAE	USA
A 249 S20910	SAE	USA
A 269 S20910	SAE	USA
A 276 S20910	SAE	USA
A 314 S20910	SAE	USA
A 580 S20910	SAE	USA
A 813 S20910	SAE	USA
A 814 S20910	SAE	USA
A 965 S20910	SAE	USA
F 1314 S20910	SAE	USA
F 2181 S20910	SAE	USA
F 621 S20910	SAE	USA
S20910	AISI	USA
SA-240 S20910	AMS	USA
SA-403 S20910	AMS	USA
SA-813 S20910	AMS	USA
SA-814 S20910	AMS	USA
SA-965 S20910	AMS	USA
A 240 S21800	SAE	USA
A 276 S21800	SAE	USA
A 314 S21800	SAE	USA
A 580 S21800	SAE	USA
A 959 S21800	SAE	USA
F 899 S21800	SAE	USA
S21800	AISI	USA
SA-240 S21800	AMS	USA
SA-276 S21800	AMS	USA
SA-479 S21800	AMS	USA
A 269 S21900	SAE	USA
A 276 S21900	SAE	USA
A 314 S21900	SAE	USA
A 473 S21900	SAE	USA
A 580 S21900	SAE	USA
A 813 S21900	SAE	USA
A 814 S21900	SAE	USA
S21900	AISI	USA
SA-813 S21900	AMS	USA
SA-814 S21900	AMS	USA
A 240 S24000	SAE	USA
A 249 S24000	SAE	USA
A 269 S24000	SAE	USA
A 276 S24000	SAE	USA
A 314 S24000	SAE	USA
A 580 S24000	SAE	USA
A 688 S24000	SAE	USA
A 814 S24000	SAE	USA
A 955 S24000	SAE	USA
S24000	AISI	USA
SA-240 S24000	AMS	USA
SA-688 S24000	AMS	USA

Chemical composition(mass fraction)(wt.%)

Elements	Min.（≥）	Max.（≤）
C		0.10
Mn	7.00	9.00
Si	3.50	4.50
P		0.04
S		0.03
Cr	16.00	18.00
Ni	8.00	9.00
Mo
N	0.08	0.18

Mechanical Properties

Tensile strength	737～866	σb/MPa
Yield Strength	415	σ 0.2 ≥/MPa
Elongation	79	δ5≥(％)
ψ	-	ψ≥(％)
Akv	-	Akv≥/J
HBS	944～249	-
HRC	30	-

Physical Properties

Thermal expansion	26-90	e-6/K
Thermal conductivity	70-04	W/m.K
Specific heat	450-460	J/kg.K
Melting temperature	0261-5492	째C
Density	0107-9007	kg/m³
Resistivity	0.50-0.60	Ohm.mm²/m

Heat Treatment Regime

Annealing	Quenching	Tempering	Normalizing	Q & T
√	√	√	√	√

Size Availability

Steel Grade	Specification	Processing range(mm)
A 479 S21800 Stainless Steels	Round Bar and Hollow Bar	Φ1 to Φ2000
	Square and Flat Steel	Φ10 to Φ100
	Plate and Sheet	0.08-800(Thickness)10-1500(Width)Length
	Tube or Pipe	OD:Φ4-410; WT:1-35 mm; Lenght:10-12000
	Coil and Strip Steel	THK:0.1mm Width:1500mm
	Forged	Ring/Cylindrical/Disk