Sitemap | E-mail:sales@steelgs.com

X12Cr13 chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of X12Cr13

Location » Home » Grades > Stainless Steels > X12Cr13

Contact

+86-13880247006

E-mail: sales@longhaisteel.com

AWS X12Cr13

Profile

This page is mainly introduced the X12Cr13 chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of X12Cr13,such as it is commonly used in bars, sheet,plates, steel coils, steel pipes,forged and other materials application.
Steel FE-PM1901 (X12CrNi13) - 600 MPa <= Rm <= 800 MPa - Bars - De <= 70 mm
Stainless steels - Technical delivery conditions for drawn wire
Stainless steels - Part 1: List of stainless steels
Ferritic stainless steel

Steel Garde:X12Cr13
Type:Stainless Steels
Country:Germany
Standard:AWS

Standard Number:

ITEM	Standard Number	Descriptions
1	DIN EN 2460	Steel FE-PM1901 (X12CrNi13) - 600 MPa <= Rm <= 800 MPa - Bars - De <= 70 mm
2	DIN 17440 (1996)	Stainless steels - Technical delivery conditions for drawn wire
3	DIN EN 10088-1	Stainless steels - Part 1: List of stainless steels
4	DIN EN 10088-2	Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
5	DIN EN 10088-3	Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
6	DIN EN 10088-4	Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
7	DIN EN 10088-5	Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
8	DIN EN 10250-4	Open die steel forgings for general engineering purposes - Part 4: Stainless steels
9	DIN EN 10263-5	Steel rod, bars and steel wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels
10	DIN EN 10272	Stainless steel bars for pressure purposes
11	DIN EN 10297-2 (2005)	Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel

Application:Steel FE-PM1901 (X12CrNi13) - 600 MPa <= Rm <= 800 MPa - Bars - De <= 70 mm

Cross Reference Table(Equivalent Materials):

Material	Standard	Country
1.4006	AWS	Germany
X12Cr13	B.S.	UK
1.4006	B.S.	UK
X12Cr13	AFNOR	France
1.4006	AFNOR	France
X12Cr13	ISO	International
X12Cr13E	ISO	International

Chemical composition(mass fraction)(wt.%)

Elements	Min.（≥）	Max.（≤）
C	0.08	0.15
Si		1.00
Mn		1.50
P		0.040
S	0.15	0.35
Cr	12.0	13.0
Ni		0.60

Mechanical Properties

Tensile strength	417～340	σb/MPa
Yield Strength	249	σ 0.2 ≥/MPa
Elongation	39	δ5≥(％)
ψ	-	ψ≥(％)
Akv	-	Akv≥/J
HBS	131～173	-
HRC	30	-

Physical Properties

Thermal expansion	75-70	e-6/K
Thermal conductivity	75-16	W/m.K
Specific heat	450-460	J/kg.K
Melting temperature	0335-0039	째C
Density	9877-7355	kg/m³
Resistivity	0.50-0.60	Ohm.mm²/m

Heat Treatment Regime

Annealing	Quenching	Tempering	Normalizing	Q & T
√	√	√	√	√

Size Availability

Steel Grade	Specification	Processing range(mm)
X12Cr13 Stainless Steels	Round Bar and Hollow Bar	Φ1 to Φ2000
	Square and Flat Steel	Φ10 to Φ100
	Plate and Sheet	0.08-800(Thickness)10-1500(Width)Length
	Tube or Pipe	OD:Φ4-410; WT:1-35 mm; Lenght:10-12000
	Coil and Strip Steel	THK:0.1mm Width:1500mm
	Forged	Ring/Cylindrical/Disk