+86-13880247006
E-mail: sales@longhaisteel.com
| ITEM | Standard Number | Descriptions |
|---|---|---|
| 1 | BS EN 10088-1 | Stainless steels - Part 1: List of stainless steels |
| 2 | BS EN 10088-2 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| 3 | BS EN 10088-3 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| 4 | BS EN 10088-4 | Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
| 5 | BS EN 10088-5 | Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes |
| 6 | BS EN 10250-4 | Open die steel forgings for general engineering purposes - Part 4: Stainless steels |
| 7 | BS EN 10263-5 | Steel rod, bars and steel wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels |
| 8 | BS EN 10272 | Stainless steel bars for pressure purposes |
| 9 | BS EN 10297-2 (2005) | Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel |
| Material | Standard | Country |
| X12Cr13 | AWS | Germany |
| 1.4006 | AWS | Germany |
| 1.4006 | B.S. | UK |
| X12Cr13 | AFNOR | France |
| 1.4006 | AFNOR | France |
| X12Cr13 | ISO | International |
| X12Cr13E | ISO | International |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | 0.08 | 0.15 | ||
| Si | 1.00 | |||
| Mn | 1.50 | |||
| P | 0.04 | |||
| S | 0.015 | |||
| Cr | 11.50 | 13.50 | ||
| Ni | 0.75 | |||
| Mo |
| Tensile strength | 913～207 | σb/MPa |
| Yield Strength | 103 | σ 0.2 ≥/MPa |
| Elongation | 25 | δ5≥(％) |
| ψ | - | ψ≥(％) |
| Akv | - | Akv≥/J |
| HBS | 701～268 | - |
| HRC | 30 | - |
| Thermal expansion | 99-14 | e-6/K |
| Thermal conductivity | 47-10 | W/m.K |
| Specific heat | 450-460 | J/kg.K |
| Melting temperature | 4598-5890 | 째C |
| Density | 2414-3094 | kg/m3 |
| Resistivity | 0.50-0.60 | Ohm.mm2/m |
| Steel Grade | Specification | Processing range(mm) |
| X12Cr13 Stainless Steels | Round Bar and Hollow Bar | Φ1 to Φ2000 |
| Square and Flat Steel | Φ10 to Φ100 | |
| Plate and Sheet | 0.08-800(Thickness)*10-1500(Width)*Length | |
| Tube or Pipe | OD:Φ4-410; WT:1-35 mm; Lenght:10-12000 | |
| Coil and Strip Steel | THK:0.1mm Width:1500mm | |
| Forged | Ring/Cylindrical/Disk |