Sitemap | E-mail:[email protected]

J 2613 chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of J 2613

Location » Home » Grades > Stainless Steels > J 2613

Contact

+86-13880247006

E-mail: [email protected]

UNS J 2613

Profile

This page is mainly introduced the J 2613 chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of J 2613,such as it is commonly used in bars, sheet,plates, steel coils, steel pipes,forged and other materials application.
Welded Flash Controlled, High Strength (500 MPa Tensile Strength) Low Alloy Steel Hydraulic Tubing, Sub-Critically Annealed for Bending, Double Flaring, and Bending

Steel Garde:J 2613
Type:Stainless Steels
Country:USA
Standard:UNS

Standard Number:

ITEM	Standard Number	Descriptions
1	SAE J 2613 (2009)	Welded Flash Controlled, High Strength (500 MPa Tensile Strength) Low Alloy Steel Hydraulic Tubing, Sub-Critically Annealed for Bending, Double Flaring, and Bending

Metallographic Structure:Precipitation-Hardening
Application:Welded Flash Controlled, High Strength (500 MPa Tensile Strength) Low Alloy Steel Hydraulic Tubing, Sub-Critically Annealed for Bending, Double Flaring, and Bending

Relevant products:

1.4980 Round Bar

Cross Reference Table(Equivalent Materials):

Material	Standard	Country
A 240 S44627	SAE	USA
A 268 S44627	SAE	USA
A 276 S44627	SAE	USA
S44627	AISI	USA
SA-240 S44627	AMS	USA
SA-268 S44627	AMS	USA
2618	ASTM	USA
2618	ASTM	USA
2618	ASTM	USA
2618	UNS	USA
2618	UNS	USA
2618	UNS	USA
9261	YB	USA
9261	UNS	USA
A 213 S32615	SAE	USA
A 322 6118	SAE	USA
A 322 6150	SAE	USA
A 322 61L18	SAE	USA
A 322 61L50	SAE	USA
A 400 9261	SAE	USA
A 479 S32615	SAE	USA
A 743 J92615	SAE	USA
A 752 Grade 6118	SAE	USA
A 752 Grade 6150	SAE	USA
A 943 S32615	SAE	USA
A 959 S32615	SAE	USA
A92618	AISI	USA
A96261	AISI	USA
B 247 2618	SAE	USA
B 569 C26130	SAE	USA
C26100	AISI	USA
C26130	AISI	USA
C92610	AISI	USA
G10261	AISI	USA
G15261	AISI	USA
J 2614	UNS	USA
J91261	AISI	USA
J92610	AISI	USA
J92613	AISI	USA
J92615	AISI	USA
L13261	AISI	USA
L52615	AISI	USA
L52618	AISI	USA
R04261	AISI	USA
S32615	AISI	USA
SA-1008 BHS Grade 26[180]	AMS	USA
SA-1008 SHS Grade 26[180]	AMS	USA
SA-213 S32615	AMS	USA
SA-240 S32615	AMS	USA
SA-312 S32615	AMS	USA

Chemical composition(mass fraction)(wt.%)

Elements	Min.（≥）	Max.（≤）
C		0.06
Si		0.75
Mn		0.75
P
S
Ni		0.50
Cr	25.00	27.00
Al
Cu		0.20
Ti
Fe
N		0.04
Mo	0.75	1.50

Mechanical Properties

Tensile strength	466～328	σb/MPa
Yield Strength	338	σ 0.2 ≥/MPa
Elongation	81	δ5≥(％)
ψ	-	ψ≥(％)
Akv	-	Akv≥/J
HBS	042～173	-
HRC	30	-

Physical Properties

Thermal expansion	38-36	e-6/K
Thermal conductivity	40-35	W/m.K
Specific heat	450-460	J/kg.K
Melting temperature	0047-4645	째C
Density	4488-7055	kg/m³
Resistivity	0.50-0.60	Ohm.mm²/m

Heat Treatment Regime

Annealing	Quenching	Tempering	Normalizing	Q & T
√	√	√	√	√

Size Availability

Steel Grade	Specification	Processing range(mm)
J 2613 Stainless Steels	Round Bar and Hollow Bar	Φ1 to Φ2000
	Square and Flat Steel	Φ10 to Φ100
	Plate and Sheet	0.08-800(Thickness)10-1500(Width)Length
	Tube or Pipe	OD:Φ4-410; WT:1-35 mm; Lenght:10-12000
	Coil and Strip Steel	THK:0.1mm Width:1500mm
	Forged	Ring/Cylindrical/Disk