X2CrNiMoV13-5-2, 1.4415 chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of X2CrNiMoV13-5-2, 1.4415

EN X2CrNiMoV13-5-2, 1.4415

Profile

This page is mainly introduced the X2CrNiMoV13-5-2, 1.4415 chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of X2CrNiMoV13-5-2, 1.4415,such as it is commonly used in bars, sheet,plates, steel coils, steel pipes,forged and other materials application.

X2CrNiMoV13-5-2, 1.4415 Martensitic stainless steel

  • Steel Garde:X2CrNiMoV13-5-2, 1.4415
  • Type:Stainless Steels
  • Country:European
  • Standard:EN
  • Standard Number:
    ITEM Standard Number Descriptions
    1 EN 10088-3: 2005 Stainless steels. Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
    2 EN 10088-1: 2005 Stainless steels. List of stainless steels
  • Metallographic Structure:Martensite
  • Application:Martensitic stainless steel

Chemical composition(mass fraction)(wt.%)

Elements Min.(≥) Max.(≤) Similar Remarks
C   0.03
Si   0.50
Mn   0.50
P   0.04
S   0.015
Cr 11.50  13.50
Ni 4.50  6.50
Mo 1.50  2.50
V 0.10  0.50
Ti   0.01

Mechanical Properties

Tensile strength 336~979 σb/MPa
Yield Strength 078 σ 0.2 ≥/MPa
Elongation 24 δ5≥(%)
ψ - ψ≥(%)
Akv - Akv≥/J
HBS 562~915 -
HRC 30 -

Physical Properties

Thermal expansion 47-81 e-6/K
Thermal conductivity 77-46 W/m.K
Specific heat 450-460 J/kg.K
Melting temperature 6425-9064 째C
Density 3536-5092 kg/m3
Resistivity 0.50-0.60 Ohm.mm2/m
     

Heat Treatment Regime

Annealing

Quenching

Tempering

Normalizing

Q & T

Size Availability

Steel Grade Specification Processing range(mm)
X2CrNiMoV13-5-2, 1.4415 Stainless Steels Round Bar and Hollow Bar Φ1 to Φ2000
Square and Flat Steel Φ10 to Φ100
Plate and Sheet 0.08-800(Thickness)*10-1500(Width)*Length
Tube or Pipe OD:Φ4-410; WT:1-35 mm; Lenght:10-12000
Coil and Strip Steel THK:0.1mm Width:1500mm
Forged Ring/Cylindrical/Disk

Technical specification/standard for download

Hot keywords:X2CrNiMoV13-5-21-4415
Previous: X3CrNiMo17-13-3, 1.4436, X2CrNiMo18-14-3, 1.4435, 1.4432, X2CrNiMo17-12-3
Next: 1.4104, X14CrMoS17, AISI 430F