1.4104, X14CrMoS17, AISI 430F chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of 1.4104, X14CrMoS17, AISI 430F

EN 1.4104, X14CrMoS17, AISI 430F

Profile

This page is mainly introduced the 1.4104, X14CrMoS17, AISI 430F chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of 1.4104, X14CrMoS17, AISI 430F,such as it is commonly used in bars, sheet,plates, steel coils, steel pipes,forged and other materials application.

for drawn and peeled bars

  • Delivery condition +A

    • Tensile strength, Rm: 430 - 630 N/mm2

    • Yield strength, Rp0,2: >250N/mm2

    • Elongation, A: >20%

    • Tensile strength, Rm: 430 - 730 N/mm2

    • Yield strength, Rp0,2: >250 N/mm2

    • Elongation, A: >12%

    • Tensile strength, Rm: 500 - 780 N/mm2

    • Yield strength, Rp0,2: >310 N/mm2

    • Elongation, A: >7%

    • Tensile strength, Rm: 530 - 780 N/mm2

    • Yield strength, Rp0,2: >330 N/mm2

    • Elongation, A: >7%

    • Dimensions<10mm

    • Dimensions 10-16mm

    • Dimensions 16-63mm

    • Dimensions >63mm

- for drawn wires +A

  • Delivery condition +A

    • Tensile strength, Rm:<700 N/mm2

    • Elongation, A: >20%

    • Tensile strength, Rm:<750 N/mm2

    • Elongation, A: >15%

    • Tensile strength, Rm:<800 N/mm2

    • Elongation, A: >15%

    • Tensile strength, Rm:<850N/mm2

    • Elongation, A: >15%

    • Tensile strength, Rm:<900N/mm2

    • Elongation, A: >10%

    • Tensile strength, Rm:<950N/mm2

    • Elongation, A: >10%

    • Dimensions 0.05 - 0.10mm

    • Section 0.1 - 0.2mm

    • Section 0.2 - 1.0mm

    • Section 1.0 - 3.0mm

    • Section 3.0 - 5.0mm

    • Section >5.0mm

- for hardened drawn wires

  • Sections >0.05mm

    • +C500 - Rm: 500 - 700N/mm2

    • +C600 - Rm: 600 - 800 N/mm2

    • +C700 - Rm: 700 - 900 N/mm2

    • +C800 - Rm: 800 - 1000 N/mm2

    • +C900 - Rm: 900 - 1100 N/mm2

- other mechanical properties

  • Modulus of elasticity, E: 215 GPa

  • Thermal conductivity, λ: 25 W * m-1 * K-1

  • Thermal capacity, cp: 460 J * kg-1 * K-1

  • Linear expansion coefficient, α: 10 * 10-6 K-1

  • Specific resistance, Ω: 0.7 mkOhm * m


  • Steel Garde:1.4104, X14CrMoS17, AISI 430F
  • Type:Stainless Steels
  • Country:European
  • Standard:EN
  • Standard Number:
    ITEM Standard Number Descriptions
    1 EN 10088-1 Stainless steels - Part 1: List of stainless steels
    2 EN 10088-3 Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
  • Metallographic Structure:Ferrite
  • Application:Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes

Chemical composition(mass fraction)(wt.%)

Elements Min.(≥) Max.(≤) Similar Remarks
C   0.08
Si   1.50
Mn   1.50
P   0.04
S 0.15  0.35
Cr 16.00  18.00
Ni  
Mo 0.20  0.60

Mechanical Properties

Tensile strength 985~831 σb/MPa
Yield Strength 457 σ 0.2 ≥/MPa
Elongation 76 δ5≥(%)
ψ - ψ≥(%)
Akv - Akv≥/J
HBS 472~410 -
HRC 30 -

Physical Properties

Thermal expansion 78-25 e-6/K
Thermal conductivity 38-55 W/m.K
Specific heat 450-460 J/kg.K
Melting temperature 1077-9692 째C
Density 1435-4391 kg/m3
Resistivity 0.50-0.60 Ohm.mm2/m
     

Heat Treatment Regime

Annealing

Quenching

Tempering

Normalizing

Q & T

Size Availability

Steel Grade Specification Processing range(mm)
1.4104, X14CrMoS17, AISI 430F Stainless Steels Round Bar and Hollow Bar Φ1 to Φ2000
Square and Flat Steel Φ10 to Φ100
Plate and Sheet 0.08-800(Thickness)*10-1500(Width)*Length
Tube or Pipe OD:Φ4-410; WT:1-35 mm; Lenght:10-12000
Coil and Strip Steel THK:0.1mm Width:1500mm
Forged Ring/Cylindrical/Disk

Technical specification/standard for download

Hot keywords:X6CrMoS171-4105430F
Previous: X2CrNiMoV13-5-2, 1.4415
Next: X12CrNiMoV12-3, 1.4938