+86-13880247006
E-mail: [email protected]
| ITEM | Standard Number | Descriptions |
|---|---|---|
| 1 | SAE J 470 (1976) | Wrought Nickel and Nickel-Related Alloys |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | 0.07 | |||
| Si | 1.00 | |||
| Mn | 2.00 | |||
| P | ||||
| S | ||||
| Ni | 32.00 | 38.00 | ||
| Cr | 19.00 | 21.00 | ||
| Al | ||||
| Cu | 3.00 | 4.00 | ||
| Ti | ||||
| Fe | remaining | |||
| Mo | 2.00 | 3.00 | ||
| Co |
| Tensile strength | 173～687 | σb/MPa |
| Yield Strength | 696 | σ 0.2 ≥/MPa |
| Elongation | 42 | δ5≥(％) |
| ψ | - | ψ≥(％) |
| Akv | - | Akv≥/J |
| HBS | 385～768 | - |
| HRC | 30 | - |
| Thermal expansion | 43-12 | e-6/K |
| Thermal conductivity | 84-41 | W/m.K |
| Specific heat | 450-460 | J/kg.K |
| Melting temperature | 9104-0761 | 째C |
| Density | 7707-4220 | kg/m3 |
| Resistivity | 0.50-0.60 | Ohm.mm2/m |
| Steel Grade | Specification | Processing range(mm) |
| CARPENTER 20 Cb 3 Stainless Steels | Round Bar and Hollow Bar | Φ1 to Φ2000 |
| Square and Flat Steel | Φ10 to Φ100 | |
| Plate and Sheet | 0.08-800(Thickness)*10-1500(Width)*Length | |
| Tube or Pipe | OD:Φ4-410; WT:1-35 mm; Lenght:10-12000 | |
| Coil and Strip Steel | THK:0.1mm Width:1500mm | |
| Forged | Ring/Cylindrical/Disk |
