+86-13880247006
E-mail: sales@longhaisteel.com
Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
The steel supplied most often in the form of bars, plates and pipes is used in the manufacture of tanks for chemical compounds, responsible screws, sleeves, valves, shafts, stirrers, desalination systems, flanges, pumps, pipelines as well as radiators and for the construction of aircraft structures.Duplex 1.4362 / X2CrNiN23-4 has a high resistance to acid environments and stress corrosion. It is a great, much better alternative to austenitic 316L / 1.4404 stainless steel and can also be used interchangeably with 1.4460 / X3CrNiMoN27-5-2. Grades are used in the paper, petrochemical and fuel industries, chemical, shipbuilding, nitrogen, aerospace, construction, heat and power generation and cryogenic industries.
| ITEM | Standard Number | Descriptions |
|---|---|---|
| 1 | EN 10028-7 | Flat products made of steels for pressure purposes - Part 7: Stainless steels |
| 2 | EN 10088-1 | Stainless steels - Part 1: List of stainless steels |
| 3 | EN 10088-2 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| 4 | EN 10088-3 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| 5 | EN 10088-4 | Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
| 6 | EN 10088-5 | Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes |
| 7 | EN 10216-5 (2004) | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
| 8 | EN 10217-7 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
| 9 | EN 10250-4 | Open die steel forgings for general engineering purposes - Part 4: Stainless steels |
| 10 | EN 10253-3 | Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements |
| 11 | EN 10253-4 | Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements |
| 12 | EN 10272 | Stainless steel bars for pressure purposes |
| 13 | EN 10296-2 (2005) | Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel |
| 14 | EN 10297-2 (2005) | Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | 0.030 | |||
| Si | 1.00 | |||
| Mn | 2.00 | |||
| P | 0.035 | |||
| S | 0.015 | |||
| Cr | 22.00 | 24.00 | ||
| Mo | 0.10 | 0.60 | ||
| Ni | 3.50 | 5.50 | ||
| N | 0.05 | 0.30 | ||
| Cu | 0.10 | 0.60 |
| Tensile strength | 811～273 | σb/MPa |
| Yield Strength | 039 | σ 0.2 ≥/MPa |
| Elongation | 42 | δ5≥(％) |
| ψ | - | ψ≥(％) |
| Akv | - | Akv≥/J |
| HBS | 274～812 | - |
| HRC | 30 | - |
| Thermal expansion | 98-64 | e-6/K |
| Thermal conductivity | 76-58 | W/m.K |
| Specific heat | 450-460 | J/kg.K |
| Melting temperature | 4493-7278 | 째C |
| Density | 1568-9430 | kg/m3 |
| Resistivity | 0.50-0.60 | Ohm.mm2/m |
| Steel Grade | Specification | Processing range(mm) |
| 1.4362, X2CrNiN23-4, UNS S32304 Stainless Steels | Round Bar and Hollow Bar | Φ1 to Φ2000 |
| Square and Flat Steel | Φ10 to Φ100 | |
| Plate and Sheet | 0.08-800(Thickness)*10-1500(Width)*Length | |
| Tube or Pipe | OD:Φ4-410; WT:1-35 mm; Lenght:10-12000 | |
| Coil and Strip Steel | THK:0.1mm Width:1500mm | |
| Forged | Ring/Cylindrical/Disk |
